Need Make Model and year

bettybadge · 12-12-2009, 12:06 PM

We just purchased a golf cart. we are trying to find out a definite answer as to what we have. we think it may be an EZ GO (electric 36v). It does not have the standard serial number plate on it. On the front of the cart it has Re manufactured my Classic Carts. A serial number plate is located under the driver side seat. The info on it is C24-1088 1243R and it has the name Classic Carts, Boca Raton, FL. (We can't find any info on Classic Carts in Boca Raton, FL)... The front end is squared like an old style car it has headlights and taillights. It is a 2 seater. We would love to get a definite answer as to what we have so we can do some maintenance on it. one of our main problems is The headlights dim consideralby when you accelerate to almost not being on. We are trying to find out what is making the lights go out. Any help with that question would be greatly appreciated also. I hope my picture comes out so you can see what it looks like.. thanking you all in advance for any help ..

[/IMG]

highrollinmopars · 12-12-2009, 12:55 PM

Is it a aluminum frame or steel?

bettybadge · 12-12-2009, 01:36 PM

It is a steel frame..!!

scottyb · 12-12-2009, 01:46 PM

It is a aWestern made on an Ezgo Frame. Is it 36 volts or 42 ? Can you remove the seat bottom and take a pic of the batteries and motor?

bettybadge · 12-12-2009, 01:56 PM

Its a 36 volt and I will get the pics downloaded in a few minutes. Thanks for your help.

bettybadge · 12-12-2009, 02:06 PM

I hope the pictures come out ok.... The inside of our cart

bettybadge · 12-12-2009, 02:10 PM

The wiring is in a mess...but it runs ok... only the lights dim when you accelerate. they are bright when the key is off or on... only dims when you push on the accelerater pedal..

again Thanks everyone for all your help

scottyb · 12-12-2009, 02:13 PM

That is an old Western built on early Ezgo Chassis....

About 1985
Good solid carts.

bettybadge · 12-12-2009, 02:20 PM

Thank you thank thank you.... My hubby has had me on the internet for the past 2 weeks trying to research the info on the cart. Thanks so much... for the info... now maybe he can move on with the maintenance on it. by the way would you know why the light are dimming?

scottyb · 12-12-2009, 02:35 PM

Where are they connected to for a source? Are all of the connections clean and tight? Have hubby get busy cleaning connections and replacing correded cable

Pictures of the lighting source connection both positive and negative may help.
Do you guys have a digital volt meter yet?

12-12-2009, 12:55 PM	#2
highrollinmopars Gone Wild Join Date: Sep 2008 Location: Beaufort SC Posts: 428	Re: Need Make Model and year Is it a aluminum frame or steel?

12-12-2009, 01:36 PM	#3
bettybadge Not Yet Wild Join Date: Dec 2009 Posts: 9	Re: Need Make Model and year It is a steel frame..!!
bettybadge Not Yet Wild Join Date: Dec 2009 Posts: 9

12-12-2009, 01:46 PM	#4
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,399	Re: Need Make Model and year It is a aWestern made on an Ezgo Frame. Is it 36 volts or 42 ? Can you remove the seat bottom and take a pic of the batteries and motor?

12-12-2009, 01:56 PM	#5
bettybadge Not Yet Wild Join Date: Dec 2009 Posts: 9	Re: Need Make Model and year Its a 36 volt and I will get the pics downloaded in a few minutes. Thanks for your help.
bettybadge Not Yet Wild Join Date: Dec 2009 Posts: 9

12-12-2009, 02:10 PM	#7
bettybadge Not Yet Wild Join Date: Dec 2009 Posts: 9	Re: Need Make Model and year The wiring is in a mess...but it runs ok... only the lights dim when you accelerate. they are bright when the key is off or on... only dims when you push on the accelerater pedal.. again Thanks everyone for all your help
bettybadge Not Yet Wild Join Date: Dec 2009 Posts: 9

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

12-12-2009, 02:13 PM	#8
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,399	Re: Need Make Model and year That is an old Western built on early Ezgo Chassis.... About 1985 Good solid carts.

12-12-2009, 02:20 PM	#9
bettybadge Not Yet Wild Join Date: Dec 2009 Posts: 9	Re: Need Make Model and year Thank you thank thank you.... My hubby has had me on the internet for the past 2 weeks trying to research the info on the cart. Thanks so much... for the info... now maybe he can move on with the maintenance on it. by the way would you know why the light are dimming?
bettybadge Not Yet Wild Join Date: Dec 2009 Posts: 9

12-12-2009, 02:35 PM	#10
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,399	Re: Need Make Model and year Where are they connected to for a source? Are all of the connections clean and tight? Have hubby get busy cleaning connections and replacing correded cable Pictures of the lighting source connection both positive and negative may help. Do you guys have a digital volt meter yet?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Villager year make and value	Electric Club Car
make& model	Electric EZGO
New guy here.....Question on which make/model car to modify?	Lifted Golf Carts
What year make of cart do I have.	Electric EZGO