Controller 6 pin connector replacement

bonesplitter · 05-31-2010, 11:57 AM

I have a 2001 ez go non dcs with a curtis controller. The white wire coming in from the throttle sensor is bad at the plug. It has worn out from heat and was not making a connection. I need a replacement plug, any idea's on where I may find one?? Thank's! Oh yeah. it is a 6 pin and all I can find on the actual connector is AMP b-3

bonesplitter · 06-01-2010, 11:53 AM

05-31-2010, 11:57 AM	#1
bonesplitter Not Yet Wild Join Date: May 2010 Posts: 3	Controller 6 pin connector replacement I have a 2001 ez go non dcs with a curtis controller. The white wire coming in from the throttle sensor is bad at the plug. It has worn out from heat and was not making a connection. I need a replacement plug, any idea's on where I may find one?? Thank's! Oh yeah. it is a 6 pin and all I can find on the actual connector is AMP b-3
bonesplitter Not Yet Wild Join Date: May 2010 Posts: 3

06-01-2010, 11:53 AM	#2
bonesplitter Not Yet Wild Join Date: May 2010 Posts: 3	Re: Controller 6 pin connector replacement TTT
bonesplitter Not Yet Wild Join Date: May 2010 Posts: 3

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
controller replacement	Electric EZGO
wire connector preference?	Electric EZGO
EZGO 1206sx Controller Replacement info	Electric EZGO
controller replacement 96 EZGo	Electric EZGO
PDS J2 connector Question	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum