|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-27-2011, 09:14 PM | #11 |
Gone Wild
Join Date: Nov 2008
Location: Peachtree City, Georgia
Posts: 1,546
|
Re: Alltrax DCX 500 motor controller install
Cool, that's what I thought but wanted you to confirm... Then you have it right, the light blue wire goes on the side the silver stripe of the diode which is the same side that goes to the battery. The dark blue with white stripe goes on the other side.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-27-2011, 09:16 PM | #12 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Alltrax DCX 500 motor controller install
Correct.
|
09-28-2011, 04:02 PM | #13 |
Getting Wild
Join Date: Sep 2010
Posts: 77
|
Re: Alltrax DCX 500 motor controller install
so I have to get a round tip connector and place that on both ends of the wires that previously plugged into the old curtis solenoid and place the light blue to battery side and royal blue with white stripe on the left hand side that will run to controller....Hate to be stupid but got not directions with solenoid install and just dont want to fry the controller...thanks
|
09-28-2011, 04:50 PM | #14 | |
Gone Wild
Join Date: Nov 2008
Location: Peachtree City, Georgia
Posts: 1,546
|
Re: Alltrax DCX 500 motor controller install
Quote:
Look at this picture... Granted this is on the cart that had a fire but it this is the best picture I have at the moment to help you with your questions. There are 5 circles of different color... Wire in RED circle... coming from the positive side of the battery pack. Wire with Yellow circle.... going to the Controller Small wire with Light blue circle.... light blue wire from harness Small wire with dark blue circle.... dark blue and white wire from harness. Silver circle.... the silver side of the diode... And yes you have to cut off the existing spade terminals from the small wires and crimp on ring terminals. And.... On the large wire where the Red circle is, there will also be a small red wire that goes on the same post, the ring terminal on that one is not going fit over the larger 3/8" post, so you'll need to change that ring terminal too... |
|
09-28-2011, 06:41 PM | #15 |
Getting Wild
Join Date: Sep 2010
Posts: 77
|
Re: Alltrax DCX 500 motor controller install
Started it up and at least it didnt blow up.....thanks for all your help....threw my 250lb neighbor in the back of it and up the hill we went, the one that we struggled to climb before...
|
09-28-2011, 09:44 PM | #16 |
haveacupofshutthe****up
Join Date: Jun 2011
Location: Viera, FL
Posts: 739
|
Re: Alltrax DCX 500 motor controller install
How is your acceleration now? Will it burn some rubber and/or throw some grass into the air????
|
09-29-2011, 06:46 AM | #17 |
Mr. Helper
Join Date: May 2009
Location: NY Catskills & South carolina
Posts: 445
|
Re: Alltrax DCX 500 motor controller install
when i installed my DCX500 on a 2005 club car precedent i managed to adjust settings to have gravel FLY and throw heads back. (stock motor)
But had to reduce take off speed cause the wife couldn't control and bitched. still i had my max output only set to 400 amps while all this was taking place. even with slow takeoff and 400 amp max setting the cart will do 23-24mph. ( thats after installing a custom THROTTLE CURVE FILE from alltrax-otherwise the throttle only goes 95%) so here is my question .......what settings are you using and what motor do do you have |
09-29-2011, 07:36 AM | #18 | |
haveacupofshutthe****up
Join Date: Jun 2011
Location: Viera, FL
Posts: 739
|
Re: Alltrax DCX 500 motor controller install
Quote:
|
|
09-29-2011, 08:17 AM | #19 |
Gone Wild
Join Date: Oct 2008
Location: Ga
Posts: 740
|
Re: Alltrax DCX 500 motor controller install
Alltrax,Alltrax,Alltrax
I have posted numerous times asking about the GE controllers and I get no response. I can get a GE 500Amp Peak 600Amp controller new for $356 plus shipping out of FL. Does anybody know anything about the GE Controllers? Are they junk? You can adjust the output with a turn of a screw. I can also get a 700Amp peak 800Amp for about $445. Any thoughts or input would help. Thanks, Steve |
09-29-2011, 08:19 AM | #20 | |
haveacupofshutthe****up
Join Date: Jun 2011
Location: Viera, FL
Posts: 739
|
Re: Alltrax DCX 500 motor controller install
Quote:
|
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
new Alltrax controller install ? | Electric EZGO | |||
ALLTRAX install advise/suggestions needed | Electric EZGO | |||
Alltrax DCX500 Install | Electric EZGO | |||
Alltrax DCX400 install | Electric EZGO | |||
Alltrax 4844AXE install | Electric EZGO |