lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 01-14-2021, 04:30 PM   #1
sigfla45
Gone Wild
 
sigfla45's Avatar
 
Join Date: Dec 2018
Posts: 228
Default Max armature amps xct500 AMB4

Where should my max armature motoring amps setting be with a xct500 and an Admiral MotB-4 field map set for speed? Mine is at 435 and battery amps are at 500. Should my armature amps be increased to 500 as well? Could this be why I only get 22-23 mph on my setup?
sigfla45 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 01-14-2021, 05:01 PM   #2
sigfla45
Gone Wild
 
sigfla45's Avatar
 
Join Date: Dec 2018
Posts: 228
Default Re: Max armature amps xct500 AMB4

Lastly my throttle setting is at 25%. It is fine cruising with the kids but its not super fast getting up to speed. Any suggestions on where to increase it without breaking anything?
sigfla45 is offline   Reply With Quote
Old 01-14-2021, 07:22 PM   #3
sigfla45
Gone Wild
 
sigfla45's Avatar
 
Join Date: Dec 2018
Posts: 228
Default Re: Max armature amps xct500 AMB4

So I emailed Alltrax. They said there was no reason not to Max the motoring armature amps. Before I did that I tested it and went from 435 to 450 and gained 1mph (24). They also suggested that I not run the speed map with 23 inch tires. They didn't flat out say don't but they don't recommend doing it. I switched to the torque map since I needed to save it to my computer files anyway from my old emails. With the amps maxed out and running the torque map the cart seemed just as fast. I forgot my phone in the house so I wasn't running a speedo but I had decided if it felt slow I was going back to the speed map anyway. So for now I am leaving it on the Torque field map and the cart is driving nicely with no real loss of speed.

Next up I will run a range test
sigfla45 is offline   Reply With Quote
Old 01-14-2021, 07:48 PM   #4
sigfla45
Gone Wild
 
sigfla45's Avatar
 
Join Date: Dec 2018
Posts: 228
Default Re: Max armature amps xct500 AMB4

Ok, couldn't resist. Torque field map just did 25mph at 500 motoring armature amps with plenty of acceleration pull. I assume I could easily get 27 or so with the speed map but I don't see the need. Its staying configured as is for now.
sigfla45 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
I am in the market for an xct500 Lithium Club Car
XCT500 Club Car Golf Carts and Parts
Xct500 Electric EZGO
Winch Amps and Voltage Reducer? How many amps can I draw? Electric EZGO
Resistor amps vs stock controller amps Electric Club Car


All times are GMT -5. The time now is 12:57 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.