|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
07-18-2015, 03:04 PM
|
#11 |
|
Not Yet Wild
Join Date: Jul 2015
Posts: 13
|
Re: G27 When i put a volt meter on the 2 sm nuts?
When i go from batt to big post it said 50 volts before i accelerator pedal on both. even with the key off. that not right is it
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-18-2015, 03:33 PM
|
#12 |
|
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,193
|
Re: G27 When i put a volt meter on the 2 sm nuts?
Sounds like it's stuck closed.
|
|
|
|
|
07-18-2015, 03:48 PM
|
#13 |
|
Not Yet Wild
Join Date: Jul 2015
Posts: 13
|
Re: G27 When i put a volt meter on the 2 sm nuts?
Anyway to bypass it to see if controller is ok?
|
|
|
|
|
07-18-2015, 04:01 PM
|
#14 |
|
Not Yet Wild
Join Date: Jul 2015
Posts: 13
|
G27 How can i bypass solenoid to see if controller is ok
cart will not move. i think i have a bad solenoid or controller or both . how can i tell ?
|
|
|
|
|
07-18-2015, 04:02 PM
|
#15 |
|
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,193
|
Re: G27 When i put a volt meter on the 2 sm nuts?
If it's stuck closed, then bypassing won't help. You can short the two big terminals to bypass it.
|
|
|
|
|
07-18-2015, 04:07 PM
|
#16 |
|
Not Yet Wild
Join Date: Jul 2015
Posts: 13
|
Re: G27 When i put a volt meter on the 2 sm nuts?
*** when i cross the 2big terminals it did not do anything. do you think i need a controller and solenoid
|
|
|
|
|
07-18-2015, 06:21 PM
|
#17 |
|
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,193
|
Re: G27 When i put a volt meter on the 2 sm nuts?
Could be other things - like bad motor brushes or bad motor.
|
|
|
|
|
07-18-2015, 06:22 PM
|
#18 |
|
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,193
|
Re: G27 When i put a volt meter on the 2 sm nuts?
What led up to the failure? You have not said much about what the history is. We can't guess what's wrong without more data.
|
|
|
|
|
07-18-2015, 08:17 PM
|
#19 |
|
......................
 Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: G27 When i put a volt meter on the 2 sm nuts?
robtrav25 Starting 4 different threads about the same problem is going to make it hard to help you. You need to keep it all in one thread to help you better. If you answer the questions that you are asked, some one will help you fix your cart. You got the answer to your question about bypassing your solenoid in this thread. And then you start another thread with the same question. Be patient and you will get the help you need. all the members here are helping you for free in there spare time
|
|
|
|
|
07-18-2015, 10:56 PM
|
#20 |
|
Not Yet Wild
Join Date: Jul 2015
Posts: 13
|
Re: G27 When i put a volt meter on the 2 sm nuts?
out of the blue it stopped working . after it stopped working it sat for like 3 mo. battery where junk . i put a new set in . but cart still will not move. buzzer works. but thay is all.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Steering wheel, Curtis 48v charger meter, Lug nuts, ETC..... | Golf Carts and Parts | |||
| wobble nuts (variance nuts) for 4x100 rim | Lifted Golf Carts | |||
| volt meter | Electric EZGO | |||
| Need new volt meter. | Electric Yamaha | |||
| Volt reading when Isolating 2 6v batts, is seperate volt meter needed? | Electric EZGO | |||
Linear Mode
