|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-13-2015, 05:49 PM | #1 |
Not Yet Wild
Join Date: Jul 2015
Posts: 5
|
Starter/Generator Accessing Bolts
I have a 2007 gas club car precedent. My belt on the starter/generator is loose. I am attempting to loosen up the bolts in order to adjust to get the belt tight again. The two pivot bolts were easy enough to access but I can not get to the carriage bolt. I tried to get to it from the front and going through the back and there is just no getting a wrench on it. I searched and it seems no one has trouble with this step. I have to be going at it from the wrong angle. Just seeing if there are any helpful hints to get at it.
Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-13-2015, 07:28 PM | #2 |
Not Yet Wild
Join Date: Jul 2015
Posts: 5
|
Re: Starter/Generator Accessing Bolts
Found the angle on it. Belt is tight!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Starter mount broken or missing bolts? EZGO TXT 2001 | Gas EZGO | |||
G1 Starter Generator | Gas Yamaha | |||
starter/generator | Gas Harley Davidson | |||
88 ezgo gas starter/generator stuck in starter mode | Gas EZGO | |||
Starter/Generator | Gas Club Car |