lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 04-04-2016, 06:15 AM   #1
MAD-DOG
Gone Wild
 
MAD-DOG's Avatar
Club Car
 
Join Date: Sep 2009
Location: WI
Posts: 157
Default Caster camber ????

G22 the top of the front wheels are tipping outward causing the inside to wear out , this is a stock cart with no suspension mods ....is there a way to correct this ?
MAD-DOG is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 04-04-2016, 08:06 AM   #2
Dave in VA
maintaining a low profile
 
Dave in VA's Avatar
Yamaha
 
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
Default Re: Caster camber ????

Check the S-shaped brackets -#18-. They may be bent...

http://www.tntgolfcar.com/yamaha-par...5_460_825.html
Dave in VA is offline   Reply With Quote
Old 04-04-2016, 09:36 AM   #3
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,449
Default Re: Caster camber ????

Like this? " /-\ ". If so, new shocks/struts (yamaha calles them "cushion assembly").
cgtech is offline   Reply With Quote
Old 04-04-2016, 01:15 PM   #4
MAD-DOG
Gone Wild
 
MAD-DOG's Avatar
Club Car
 
Join Date: Sep 2009
Location: WI
Posts: 157
Default Re: Caster camber ????

Dave Ill check them out ... If your looking at the tire -wheel assembly from the front of the cart the top of the wheel is tipping outwards quite a bit but the drivers wheel is straight up and down .... like this "\"
MAD-DOG is offline   Reply With Quote
Old 04-04-2016, 01:29 PM   #5
ScottyHeebs
Not Yet Wild
Yamaha
 
Join Date: Feb 2016
Location: Williamstown NJ
Posts: 9
Default Re: Caster camber ????

Mine after a 3" lift are like this "\-/" any idea how to fix? all it was was adding spindle lift
ScottyHeebs is offline   Reply With Quote
Old 04-05-2016, 01:31 AM   #6
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,449
Default Re: Caster camber ????

If the suspension is "all good", you might just have an alignment problem easily fixed by a toe adjustment. The problem you are describing is not a typical issue for a G22. Are you sure its not a G16? Does your brake pedal look just like this (minus the "diamond plate bling")?
Attached Images
File Type: jpg s-l1000.jpg.cf.jpg (53.3 KB, 0 views)
cgtech is offline   Reply With Quote
Old 04-12-2016, 06:46 AM   #7
MAD-DOG
Gone Wild
 
MAD-DOG's Avatar
Club Car
 
Join Date: Sep 2009
Location: WI
Posts: 157
Default Re: Caster camber ????

I measured the angel of the shock from one side to the other ---the pass was def bent thanks for the help guys
MAD-DOG is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha




Similar Threads
Thread Forum
Jakes long travel caster tips Lifted Golf Carts
Long travel front suspension, caster??? Lifted Golf Carts
Need to fix my negative caster Lifted Golf Carts
Caster and Camber 08 yamaha drive? Electric Yamaha
Caster Angle 2001 TXT Gas EZGO


All times are GMT -5. The time now is 09:40 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.