lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 06-09-2017, 04:44 PM   #1
Noneck
Getting Wild
 
Noneck's Avatar
E-Z-GO
 
Join Date: Jul 2016
Location: Bucks County, PA
Posts: 120
Default Building G29 2 awg cables. Question & Diagram

So I'm making up 2 awg cables for my 2010 G29. Do the F1 and F2 wires need to be 2 awg also? Can't hurt right? They have the spade ends on the control side. Thanks!

Sent from my SM-G935U using Tapatalk
Noneck is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 06-09-2017, 05:03 PM   #2
Noneck
Getting Wild
 
Noneck's Avatar
E-Z-GO
 
Join Date: Jul 2016
Location: Bucks County, PA
Posts: 120
Default Re: Building 2 awg cables. Question

Here's what I came up with. Maybe this will help someone else making up their own cables.

Sent from my SM-G935U using Tapatalk
Noneck is offline   Reply With Quote
Old 06-10-2017, 12:25 PM   #3
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,449
Default Re: Building G29 2 awg cables. Question & Diagram

I would not attempt 2g Field wires. Where you gonna get a spade terminal for that cable? Won't likely deliver a performance benefit.
cgtech is offline   Reply With Quote
Old 06-10-2017, 12:37 PM   #4
Noneck
Getting Wild
 
Noneck's Avatar
E-Z-GO
 
Join Date: Jul 2016
Location: Bucks County, PA
Posts: 120
Default Re: Building G29 2 awg cables. Question & Diagram

I was wondering that about the spade terminals. Will the stock ones be ok for the field wires?

Sent from my SM-G935U using Tapatalk
Noneck is offline   Reply With Quote
Old 06-10-2017, 01:07 PM   #5
PingEye3
Gone Wild
 
PingEye3's Avatar
Club Car
 
Join Date: Sep 2014
Location: Orlando, FL
Posts: 1,308
Default Re: Building G29 2 awg cables. Question & Diagram

#10 field wire is large enough.
PingEye3 is offline   Reply With Quote
Old 06-10-2017, 01:58 PM   #6
Noneck
Getting Wild
 
Noneck's Avatar
E-Z-GO
 
Join Date: Jul 2016
Location: Bucks County, PA
Posts: 120
Default Re: Building G29 2 awg cables. Question & Diagram

Thanks Is that what the stock gauge is?

Sent from my SM-G935U using Tapatalk
Noneck is offline   Reply With Quote
Old 06-10-2017, 02:10 PM   #7
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,449
Default Re: Building G29 2 awg cables. Question & Diagram

Typically yes.
cgtech is offline   Reply With Quote
Old 06-10-2017, 02:32 PM   #8
Noneck
Getting Wild
 
Noneck's Avatar
E-Z-GO
 
Join Date: Jul 2016
Location: Bucks County, PA
Posts: 120
Default Re: Building G29 2 awg cables. Question & Diagram

Thanks!

Sent from my SM-G935U using Tapatalk
Noneck is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha




Similar Threads
Thread Forum
Question on building a cart. Electric Club Car
Cables question (probably a dumb one) Electric Club Car
Question about cables going to motor Electric Club Car
Question about battery cables Electric Club Car
Question about motor cables Electric EZGO


All times are GMT -5. The time now is 03:16 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.