|
01-06-2011, 09:59 AM
|
#1 |
|
Not Yet Wild
Join Date: Jan 2011
Location: St. Charles Illinois
Posts: 7
|
club car pulley removal
I need to take the front case off my 98 club car fe350 because the cam isnt turning. I pulled the clutch off but cant get the pulley behind it off. Whats the trick. Thanks
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-06-2011, 10:17 AM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: club car pulley removal
Welcome to BGW
This is the introduction section. Post this in the tech section, specifically the CC gas Section for better results! http://www.buggiesgonewild.com/gas-club-car/ |
|
|
|
01-07-2011, 09:26 AM
|
#3 |
|
Bad *** Speller!
Join Date: Oct 2009
Location: Columbus, Ohio
Posts: 1,338
|
Re: club car pulley removal
wes steve, you need a tool to pull the cluch off. its easy, you take the nut out, put the puller in and tighten, and blamo! clutch *** comes off! then your in the mode to do some engine work!
if you can get to a dealer or ask a site sponsor, most have the tool for around 35 to 40 bucks. some may lend you the tool on the condition you brake it you bought it! |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 94 club car motor removal | Electric Club Car | |||
| 98 club car clutch removal | Gas Club Car | |||
| 86 club engine removal | Electric Club Car | |||
| Noob question, pulley removal | Gas Club Car | |||
| 85 club car rear bearing removal | Electric Club Car | |||
Linear Mode
