g16 yamaha rear end needed?

[lilmow]

Not a drive gear no way would i weld them lol. Im talking about the 4 lil gears in the diff for the limited slip. If you weld them together then you have a (no pun intended) red neck posi track rear end.

[smallblock450sl]

Originally Posted by lilmow

Not a drive gear no way would i weld them lol. Im talking about the 4 lil gears in the diff for the limited slip. If you weld them together then you have a (no pun intended) red neck posi track rear end.

Yes, that's what I did for him. Thought I still had pictures, can't find em. Good luck

[lilmow]

oh ok yeah no need to heat treat them after welding. cause they dont move anymore. they been popping diff covers off cars and trucks for many years and welding them up for a cheep posi trac. And a car or truck has a whole lot more force on them gears. But i do much appriciate all your posts! Thanks again SmallBlock

[AGrayson84]

Originally Posted by lilmow

AGRAYSON. Thanks so much for the replies in maybe having what i needed but i went ahead and ordered a new one already. But if you have a rear diff i have one tooth bad in mine.I was gona just weld it and have a posi drive lol. But let me know fast if you could cause its going back together real soon when my parts show up. And again thanks!

No problem man, but unfortunately I do not have a spare rear diff or diff parts. If you decide to weld it let us know how that works out for you. Good luck!