|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-16-2015, 11:41 AM | #1 |
Been Wild Since Day 1
Join Date: Sep 2011
Location: Port Wentworth GA
Posts: 778
|
factory wiring harness
looking for a factory wiring harness for a 2004 ezgo txt series cart. im looking for one that has the factory lights hook up horn, turn signal that works off a key switch . the cart I have right now did not come with lights and some one added them do the cart with another 12v battery and I want to do away with that and just hook up the factory wiring in this cart to make it a lot e-z-er
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-16-2015, 01:33 PM | #2 |
Been Wild Since Day 1
Join Date: Sep 2011
Location: Port Wentworth GA
Posts: 778
|
Re: factory wiring harness
it does not have to be new. would like to find a good used one
|
10-16-2015, 01:42 PM | #3 |
Guest
Posts: n/a
|
Re: factory wiring harness
i would add a homemade harness to a fuse block and reducer
i can diagram it out for you |
10-16-2015, 02:04 PM | #4 |
Been Wild Since Day 1
Join Date: Sep 2011
Location: Port Wentworth GA
Posts: 778
|
I would rather have a factory one . Don't have the time to try and wire up all that. But if u like I'll take that diagram
Sent from my SCH-I545 using Tapatalk |
10-16-2015, 02:17 PM | #5 |
Guest
Posts: n/a
|
Re: factory wiring harness
ok give me a day
|
10-16-2015, 02:18 PM | #6 |
Been Wild Since Day 1
Join Date: Sep 2011
Location: Port Wentworth GA
Posts: 778
|
Ok
Sent from my SCH-I545 using Tapatalk |
10-16-2015, 02:26 PM | #7 |
Gone Wild
Join Date: Jul 2009
Location: Lake Elsinore Ca.
Posts: 549
|
Re: factory wiring harness
worst comes to worst you can always order from ezgo, the wire loom for my 96
TXT sepex was only $83 and change if I remember correctly |
10-16-2015, 02:27 PM | #8 |
Been Wild Since Day 1
Join Date: Sep 2011
Location: Port Wentworth GA
Posts: 778
|
And that came with the light hook ups and all that works off the key switch
Sent from my SCH-I545 using Tapatalk |
10-16-2015, 05:33 PM | #9 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: factory wiring harness
There are two wiring harnesses on carts with factory installed accessories.
The Acessory wiring harness is the same on sepex and series carts, the the control harness is different. https://shop.ezgo.com/products/Acces...-Medalist.html https://shop.ezgo.com/products/Contr...roduct_id=3616 The above links will at least give you the part numbers to look for. ---------- FWIW: Here is the DCS control harness vagabond is probably talking about. Price has gone up. https://shop.ezgo.com/products/DCS-C...ness-Only.html |
10-16-2015, 05:34 PM | #10 |
Guest
Posts: n/a
|
Re: factory wiring harness
this is the factory lights/wiring with a reducer for the TXT
it shows the connectors and has brake lights note: the light switch shown is part of the key switch i used a scottyb reducer cause it is very good |
|
|
Similar Threads | ||||
Thread | Forum | |||
Installing 48V-12V reducer in cart with factory wiring harness, How do it work??? | Electric EZGO | |||
Factory Light wiring | Electric Club Car | |||
Wiring Harness | Electric EZGO | |||
g 16a wiring harness | Gas Yamaha |