|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
03-19-2018, 10:45 AM | #11 | |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Solenoid Clicks but cart does not move, QP0399 Pathway Golf (IQ-P)
Quote:
Now I used broad statements above as there are wiper arms, pads, micro-switches, output signals, key switches, terminal ends, cable ends, plugs, etc. etc. that all play into troubleshooting these things.... |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-19-2018, 10:45 AM | #12 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Solenoid Clicks but cart does not move, QP0399 Pathway Golf (IQ-P)
|
03-19-2018, 03:22 PM | #13 |
Not Yet Wild
Join Date: Dec 2017
Posts: 25
|
Re: Solenoid Clicks but cart does not move, QP0399 Pathway Golf (IQ-P)
OK great. I leave in about an hour to go home.
Let the good times roll ha ha! Thanks again for all the info! |
03-19-2018, 07:37 PM | #14 |
Not Yet Wild
Join Date: Dec 2017
Posts: 25
|
Re: Solenoid Clicks but cart does not move, QP0399 Pathway Golf (IQ-P)
Well I jumped the solenoid by moving the yellow wire which looks like the controller power to the red pole from the battery. Still get a click click but cart doesn't move. What is the next thing to test?
Sent from my A0001 using Tapatalk |
03-19-2018, 07:53 PM | #15 |
Not Yet Wild
Join Date: Dec 2017
Posts: 25
|
Re: Solenoid Clicks but cart does not move, QP0399 Pathway Golf (IQ-P)
How can I test to see if the motor is getting correct voltage at F1 F2 A1 A2 posts on it? What exactly is each pole?
Sent from my A0001 using Tapatalk |
03-19-2018, 08:04 PM | #16 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Solenoid Clicks but cart does not move, QP0399 Pathway Golf (IQ-P)
Did you jump across the solenoid as described by Lochlin? You need to try that and make sure you are getting the current across it.
Did you look at the drawing I gave you and trace everything out? You need to do that too and make sure you are not missing something.... |
03-19-2018, 08:13 PM | #17 |
Not Yet Wild
Join Date: Dec 2017
Posts: 25
|
Re: Solenoid Clicks but cart does not move, QP0399 Pathway Golf (IQ-P)
What's this box on the floor with the red wire going to it?
Sent from my A0001 using Tapatalk |
03-19-2018, 08:21 PM | #18 |
Not Yet Wild
Join Date: Dec 2017
Posts: 25
|
Re: Solenoid Clicks but cart does not move, QP0399 Pathway Golf (IQ-P)
Yes I jumped it with a heavy 2 gauge cable. Click click but motor does not fire.
Sent from my A0001 using Tapatalk |
03-19-2018, 09:24 PM | #19 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Solenoid Clicks but cart does not move, QP0399 Pathway Golf (IQ-P)
|
03-19-2018, 09:26 PM | #20 | |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Solenoid Clicks but cart does not move, QP0399 Pathway Golf (IQ-P)
Quote:
If you want test the motor do this Continuity Test first. Place the Run/Tow switch in "Tow" and then disconnect the pack and then all the cables from the motor. (Be sure to double wrench every motor post/stud when breaking them lose or you may break them off. Spray them down with penetrating oil prior to doing it). Get out your DVM and set it to the Continuity setting and: - Test between A1 and A2 (Beep) - Test between F1 and F2 (Beep) - Test between A1 and F1 (No Beep) - Test between A1 to Motor Case (No Beep) - Test between F1 to Motor Case (No Beep) Now flip your meter to Ohms/Resistance and: - Test between F1 and F2 and you should get 0.8 to 1.2 Ohms If all those are correct as stated above then you can test the motor: To test run a Sepex motor: With all cables removed from the motor, jack the cart up at the rear and connect a jumper from A1 to F1 and then a jumper from A2 to F2. Connect 12 volts positive to A1/F1 and 12 volts negative to A2/F2. You may want to have a disconnect switch in-line with the power supply as some do and some do not.... And remember that you are only "testing" the motor so you don't want or need to engage it very long. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Lift Kit for QP0399 Pathway Golf (IQ-P) | Electric Club Car | |||
Solenoid clicks then clicks cart doesn't move | Electric EZGO | |||
48v ez-go golf cart clicks but doesn't move | Electric EZGO | |||
Solenoid clicks but cart will not move (sometimes) | Electric EZGO | |||
1995 ezgo solenoid clicks but cart won't move | Electric EZGO |