|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-09-2018, 07:05 PM | #1 |
Not Yet Wild
Join Date: Apr 2018
Location: Mo
Posts: 30
|
Pin #7 DCS controller
Working on an Ezgo DCS cart. Cart will not move in forward or reverse. I’ve followed the troubleshooting manual.
Everything was good until I get to step 5. Step 5 reads: At Pin 7 with key switch on, accelerator pedal up and F or R selected there should be reference battery voltage. If not check wiring or components. I only have 28volts at Pin 7. My batteries are reading 37. “Check wiring or components” is very vague. Can someone explain a little more what direction I should go. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-09-2018, 08:46 PM | #2 | |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: Pin #7 DCS controller
Quote:
Sent from my SM-G930R4 using Tapatalk |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
a DC motor controller ( electronic speed controller) | Golf Carts and Parts | |||
Controller cover & heatsink - larger controller | Electric EZGO | |||
RXV controller not responding to upgrade handheld device to program controller | Electric EZGO | |||
Plum Quick Bandit + 500 AMP Controller OR Executioner w/ Stock Controller | Electric Club Car | |||
Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 | Electric EZGO |