|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
05-29-2018, 09:55 AM
|
#1 |
|
Gone Wild
Join Date: May 2018
Location: Florida
Posts: 501
|
Before i buy the wrong stuff to go 48v
I have an 89 ds that has a the D&D high torque 48v motor and a , logisystems 700 amp controller thats good for 36/48v.. i just bought the high amp 36v solenoid to help with the low end shutter.
A buddy of mine has a 48v F/R switch i can get from him, a good solenoid and a charge port.. BUT my question is on my f/r switch i have 4 big cables that run to it and 2 for the micro switch.. On the 48v switches they have 2 big cables and like 5 little ones with spade connectors and im curious as to how this is wired up What am i missing.. Thank you |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-29-2018, 10:02 AM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: Before i buy the wrong stuff to go 48v
Use the same switch you are using now. 48v results in lower amperage flow and less heat at the F&R switch. If the F&R is working now on 36 it will work on 48.
|
|
|
|
|
05-29-2018, 10:05 AM
|
#3 |
|
Gone Wild
Join Date: May 2018
Location: Florida
Posts: 501
|
Re: Before i buy the wrong stuff to go 48v
Awesome thats good to hear.. so in a sense all i need is batteries and a charger and im good correct ?
|
|
|
|
|
05-31-2018, 07:17 AM
|
#4 |
|
Getting Wild
Join Date: Jun 2017
Location: New Strawn, KS
Posts: 120
|
Re: Before i buy the wrong stuff to go 48v
Yes
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| HID or LED stuff | Lifted Golf Carts | |||
| Big Stuff !!! | Side x Sides/ATVs/Quads/Bikes/Jeeps/4x4's! | |||
| New Stuff | Design Center | |||
Linear Mode
