95 CC DS need some ideas

[manwtn]

[quote=scottyb;1540880]

Originally Posted by manwtn

I thought you were the maintenance guy not a taxi

I do maintenance but need the seat to take my girls to the bus stop


Sent from my iPhone using Tapatalk

[manwtn]

Originally Posted by Mooncarter

manwtn, look at my thread "Something Different." You will see what I am talking about.

But, it does not have the straps that hold the golf bags on the back. It is the new style DS Seat back/roof supports on an older DS. Bolts right up. The straps are handy for strapping just about anything to the back of the cart.

I looked at your post I like how yours look do you have a parts list I could follow for the seat and brackets


Sent from my iPhone using Tapatalk

[Mooncarter]

Originally Posted by manwtn

I looked at your post I like how yours look do you have a parts list I could follow for the seat and brackets


Sent from my iPhone using Tapatalk

I do not know the part numbers. Anything from 1982 until 1999 will have 2 seat backs. Anything after that will have a single seat back. Either will work for your cart. You can probably find the whole setup (used) at any cart shop, although they are becoming harder to find all the time.

I have found from working at a golf course, and around my little 13 acres, that a stock setup with the bag straps are quite handy. If you need a shovel, rake etc. just put a 5 gallon bucket in the bagwell and strap down the handle(s). You can also strap the bucket, stepladder, or whatever with the straps. As far as carrying much on top, use your own judgement but what you have now looks like a rear seat was removed and the top not very sturdy.

Hope this helps.

[Mooncarter]

Also, can you post a photo of the rear of your cart? I would like to see the back of the seat brackets.

[manwtn]

It had a utility bed on it but I removed it. I thought it was in better shape but come to find out the bottom of it was rusted out. The reason I removed the bed was to wire the lights. That’s when I discovered it was rusted through

Here is the back end



Side View



This the missing rubber on my handles for the seat. I am not sure how I am going to repair this. Maybe someone can point me in the right direction.




Sent from my iPhone using Tapatalk

[Mooncarter]

You will need the whole bracket assembly. Your seat backs will work with the older style. That thing looks pretty flimsy/shaky the way it is.

[manwtn]

It’s actually not that bad. I thought it would be too


Sent from my iPhone using Tapatalk

[manwtn]

Is this what I need

https://rover.ebay.com/rover/0/0/0?m...2F142933706439


Sent from my iPhone using Tapatalk

[Mooncarter]

Yes. That is the newer style. I'm not sure if your seat backs will work with that, you may need a new seat back. Or, if you look at mine from the "Something Different" thread, I built the seat back with plywood and foam rubber. You will also need the roof supports for that style.

[Mooncarter]

Originally Posted by manwtn

Is this what I need

https://rover.ebay.com/rover/0/0/0?m...2F142933706439


Sent from my iPhone using Tapatalk

That is a good price shipped to you. Make sure he is sending the whole assembly and not just the basket.