|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
10-29-2018, 12:17 PM
|
#11 |
|
Gone Wild
 Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Starting with an XCT and NO HARNESS. Which should I use?
Part number if you don’t mind?—- I only see the FNR harness.
Club Car DS driver’s club #59 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-29-2018, 01:30 PM
|
#12 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,146
|
Re: Starting with an XCT and NO HARNESS. Which should I use?
PDS Control Harness 74324G02 but be warned, they are proud of it $125.. If you have a local cart shop they may have a used one
|
|
|
|
|
10-29-2018, 02:03 PM
|
#13 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Starting with an XCT and NO HARNESS. Which should I use?
If I remember right the PDS harness had 3 or 4 parts. If you are lucky the keyswitch harness, the pedal box harness, and the Run/tow harness will plug in.
|
|
|
|
|
10-29-2018, 02:56 PM
|
#14 |
|
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: Starting with an XCT and NO HARNESS. Which should I use?
Nope. None of those will. Speed sensor is the only compatible one[emoji53]
Club Car DS driver’s club #59 |
|
|
|
|
10-29-2018, 05:29 PM
|
#15 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Starting with an XCT and NO HARNESS. Which should I use?
Use the adapter and G19 controller...It's going to be sooooo much easier...and I know somebody with a $100 gift certificate
 |
|
|
|
|
10-29-2018, 06:25 PM
|
#16 |
|
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Starting with an XCT and NO HARNESS. Which should I use?
[emoji16] You think it would work with the unusual pin arrangement? I guess with your adapter I could cut the harness and splice the wires.
Club Car DS driver’s club #59 |
|
|
|
|
10-29-2018, 06:48 PM
|
#17 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Starting with an XCT and NO HARNESS. Which should I use?
Call Alltrax and ask their tech guys. They can tell you what adapter is needed and what to expect in terms of any modification. The adapter I have is made by them.
|
|
|
|
|
10-29-2018, 07:13 PM
|
#18 |
|
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: Starting with an XCT and NO HARNESS. Which should I use?
I’ll call them tomorrow.
Club Car DS driver’s club #59 |
|
|
|
|
10-30-2018, 02:31 PM
|
#19 |
|
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: Starting with an XCT and NO HARNESS. Which should I use?
Just talked to the guys at Alltrax. They said it would work for basic functionality but additional features such as the factory two- speed wouldn’t work.
I’m still not sure though just because the FNR switch and key switch are all crossed up on mine. How would I know how to put them back properly if I got a new controller? Club Car DS driver’s club #59 |
|
|
|
|
11-07-2018, 10:06 PM
|
#20 |
|
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: Starting with an XCT and NO HARNESS. Which should I use?
Updating this thread. I got the controller and harness adapter from Scotty, and with some wire tracing, it works great. That old controller is gone, and replaced with a fully customizable Alltrax.
Thank you for all the help again.   Club Car DS driver’s club #59 |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Harness Help | Electric Club Car | |||
| PDS Harness | Electric EZGO | |||
| WTB: Ez Go PDS Run/Tow Harness | Golf Carts and Parts | |||
| Starting the new buggy...starting from new this time. | Members Rides | |||
| she's starting to shimmy....she's starting to shudder | Electric Club Car | |||
Linear Mode
