|
03-28-2021, 11:39 AM
|
#1 |
|
Gone Wild
Join Date: Feb 2015
Location: Quad cities
Posts: 334
|
Pb6 pot box
Trying to check the pot box with ohms when at rest still get a slight bit of resistance try adjusting pot so when I go full forward I set it at 5 k but when it returns to stop idle setting it still reads some ohms try setting it at close to o ohms then to high on the high side all most 6 k how much resistance is allowed a rest?Has a Curtis controller
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-28-2021, 07:26 PM
|
#2 |
|
Gone Wild
Join Date: Feb 2015
Location: Quad cities
Posts: 334
|
Re: Pb6 pot box
Did some reading according to Curtis anything under 50 ohms is acceptable mine is at 2 ohm at idle
|
|
|
|
Linear Mode
