Alltrax moutning location on 03 DS?

[Winston Ellis]

Cart specs in my signature.

Will an SR48400 or SR48400 fit in the factory controller location? I really have no where else to install one.


Thanks,
Winny

[DaveMJ]

Yes - I installed my 500A Alltrax in that location on a 2004 CarryAll. I had to drill new mounting holes, but it fits. Same for the solenoid.

PXL_20210125_214957575.jpg

[Winston Ellis]

Originally Posted by DaveMJ

Yes - I installed my 500A Alltrax in that location on a 2004 CarryAll. I had to drill new mounting holes, but it fits. Same for the solenoid.

Attachment 218688

Awesome, that is exactly what I was looking for! What motor are you running?

[DaveMJ]

This is an unusual set up in a CarryAll.

It's a Two Speed EMP Motor (note the extra connections and second F/R type switch).

It has a Torque Setting with a max speed of about 19 MPH, but capable of pulling a god sized boat up a boat ramp. In the Speed setting it will do 24 MPH.

Speed Torque Switch.jpg PXL_20210126_180312355.jpg

[Winston Ellis]

Originally Posted by DaveMJ

This is an unusual set up in a CarryAll.

It's a Two Speed EMP Motor (note the extra connections and second F/R type switch).

It has a Torque Setting with a max speed of about 19 MPH, but capable of pulling a god sized boat up a boat ramp. In the Speed setting it will do 24 MPH.

Attachment 218696 Attachment 218697

That's neat, I was wondering why one of the motor leads had 2 wires going into it.