|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
12-16-2009, 06:11 PM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2009
Posts: 6
|
Upgrade question
Forgot to mention it is 36V
I have a 2000 EZGO electric cart that I just purchased. What I know is that is has a high speed motor, it is lifed, it has 4 gage wiring, it has 22X11 8 mudbuster tires, and it has the original controler. I am going to somewhat upgrade and put a GE Heavy Duty 500/600 amp controler with ITS adapter, new batteries and a beefed up F & R switch. My question is about the controler. My controler has a terminal for plug brake and the GE controler does not. Will that be a problem? Also where is a good site online to get parts? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-17-2009, 10:40 PM
|
#2 |
|
nimda
 Join Date: Jun 2007
Posts: 13,022
|
Re: Upgrade question
You should be able to wire it up no problem as long as you have the pinout arrangement of the controller.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Question on 48v upgrade | Electric EZGO | |||
| Upgrade FNR switch, question | Electric EZGO | |||
| Upgrade sequence question | Electric EZGO | |||
| controller upgrade question | Electric EZGO | |||
| Upgrade to controller question | Electric EZGO | |||
Linear Mode
