Motor Testing 85 ezgo resistor

tnt.lee · 06-02-2010, 06:33 AM

Does anyone out there have an easy way of jumping the motor directly to test serviceability? I found a test on another sight but the motor connections are not labelled the same,, this cart starting to become a lemon. the tests states to jump S2 A2 while connecting + to S1 and - to A1 from what i can figure..

scottyb · 06-02-2010, 08:22 AM

This test is best done with 12 to 18v power supply and with the motor bolted up to the differential. The motor is very torquey and will get away from you on the bench ......
(you won't have the LR1 & LR2 connections) hope this helps

tnt.lee · 06-02-2010, 08:56 AM

thanks scotty i'll give 'er a try, it doesn't pass the continuity test on the electrical posts, just want to be sure

scottyb · 06-02-2010, 08:58 AM

If you have continuity between any A and any S terminal then you have an internal problem.... good luck

tnt.lee · 06-02-2010, 11:51 AM

Tried it all continuity between respective coils but won't turn I figure its corosion, time for the scrap bin

06-02-2010, 06:33 AM	#1
tnt.lee Not Yet Wild Join Date: May 2010 Location: Trenton, ont. Can Posts: 12	Motor Testing 85 ezgo resistor Does anyone out there have an easy way of jumping the motor directly to test serviceability? I found a test on another sight but the motor connections are not labelled the same,, this cart starting to become a lemon. the tests states to jump S2 A2 while connecting + to S1 and - to A1 from what i can figure..

06-02-2010, 08:56 AM	#3
tnt.lee Not Yet Wild Join Date: May 2010 Location: Trenton, ont. Can Posts: 12	Re: Motor Testing 85 ezgo resistor thanks scotty i'll give 'er a try, it doesn't pass the continuity test on the electrical posts, just want to be sure

06-02-2010, 08:58 AM	#4
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,410	Re: Motor Testing 85 ezgo resistor If you have continuity between any A and any S terminal then you have an internal problem.... good luck

06-02-2010, 11:51 AM	#5
tnt.lee Not Yet Wild Join Date: May 2010 Location: Trenton, ont. Can Posts: 12	Re: Motor Testing 85 ezgo resistor Tried it all continuity between respective coils but won't turn I figure its corosion, time for the scrap bin

Similar Threads
Thread	Forum
Motor Rebuilder For Resistor Cart	Electric Club Car
Testing coil on ezgo electric motor	Electric EZGO
48V Motor Testing Procedure?	Electric Club Car
Motor Testing	Electric Club Car
Testing motor	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum