|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-23-2012, 02:26 PM | #1 |
Not Yet Wild
Join Date: Aug 2009
Posts: 59
|
G16 F&R switch
How do I test the F&R switch on a G16E? I am getting 37.5 volts on all 4 contacts (in forward and reverse) when the pedal is depressed and the solenoid clicks. Also getting 37.5v on all 4 post on the motor.
The cart is not running, but the solenoid clicks. I have 37.5 on both larger post of the solenoid, and on 1 small post when the pedal is depressed. 37.5v on the battery side of the solenoid when the pedal is released. Should I suspect a problem in the motor, controller, or the switch? How can I diagnose it? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
forward/reverse switch change to toggle switch | Electric Club Car | |||
Pick the winner: ITS, Read Switch, or Key Switch | Electric EZGO | |||
2009 Precedent run/tow toggle switch replaced with keyed switch | Electric Club Car | |||
Forward Reverse switch limit switch | Electric Club Car | |||
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha |