|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
11-21-2013, 11:04 AM
|
#11 |
|
Not Yet Wild
Join Date: Mar 2012
Location: Acworth Ga
Posts: 9
|
Re: DCS FNR switch
Thought pics might help!
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-21-2013, 11:04 AM
|
#12 |
|
Techno-Nerd
 Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: DCS FNR switch
Try entering the carts serial number on the EZGO lookup site: http://www.shopezgo.com/customer-ser...ialNumber.html
That should tell you the year, model and drive type. |
|
|
|
|
11-21-2013, 11:13 AM
|
#13 |
|
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: DCS FNR switch
According to the serial number, it a 2000 Gas TXT.
 Make: TXT Type: Gas Model: TXT Standard Year: 2000 Maybe somebody converted a Gasser to a Sparky???? |
|
|
|
|
11-21-2013, 11:14 AM
|
#14 | |
|
Not Yet Wild
Join Date: Mar 2012
Location: Acworth Ga
Posts: 9
|
Re: DCS FNR switch
Quote:
|
|
|
|
|
|
11-21-2013, 11:40 AM
|
#15 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: DCS FNR switch
Johnnie - I think this is another 2000 PDS cart with the cross-over system.
|
|
|
|
|
11-21-2013, 11:51 AM
|
#16 | |
|
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: DCS FNR switch
Quote:
 |
|
|
|
|
|
11-21-2013, 11:56 AM
|
#17 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: DCS FNR switch
Yeah - I give up on it - half the time it's wrong... if the F&R ms are bad here he can replace them ($30 ea) or convert to PDS rocker .
|
|
|
|
|
11-21-2013, 12:00 PM
|
#18 | |
|
Not Yet Wild
Join Date: Mar 2012
Location: Acworth Ga
Posts: 9
|
Re: DCS FNR switch
Quote:
For now the ms are fine and the switch is working but what would be involved in converting to the PDS rocker? I'll be switching over to an alltrax in a few weeks. BTW, thanks for the help to you and Johnnie! |
|
|
|
|
|
11-21-2013, 12:08 PM
|
#19 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: DCS FNR switch
Diagram for conversion posted on the previous page - I think it may be Johnnie's work?
|
|
|
|
|
11-21-2013, 03:18 PM
|
#20 |
|
Not Yet Wild
Join Date: Mar 2012
Location: Acworth Ga
Posts: 9
|
Re: DCS FNR switch
FWIW, I traced the wires back from the J1 plug to the "hockey puck" FNR switch.
pin1 ORN/RED - traces back to where ms and is combination of each side of the ms (fwd/rev) on the "puck" board (tied together) pin2 ORN - traces back to one of the ms (rev) pin3 GRN - traces back to one of the ms (fwd) So my assumption, please correct me if I'm wrong. If I really wanted to, I'd just need to run new wires to the front of the cart and connect them to a new rocker switch. (again assuming, its a straight connection with no other ms). And of course, I know what they say about assuming!!!! hence the question/confirmation. |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| forward/reverse switch change to toggle switch | Electric Club Car | |||
| Pick the winner: ITS, Read Switch, or Key Switch | Electric EZGO | |||
| 2009 Precedent run/tow toggle switch replaced with keyed switch | Electric Club Car | |||
| Forward Reverse switch limit switch | Electric Club Car | |||
| Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha | |||
Linear Mode
