Need Lithium don’t want to build Pack

[NCPW]

Originally Posted by davidgolfer

A severe golf addiction once they get down to only going 27 holes I have to trade them in.

That'll do it

[outdoorjunke]

Originally Posted by agpfl

Looks like the same tech direct is selling. One thing to be very careful about with these packs is the amount of amps the system can handle. Its 60 amp continuous and 120 amp peak. I picked up one of these packs for a flip I am in the middle of so I could document a way to reconfigure the pack to bypass the BMS for output. You would still use the BMS during the charging and balancing portions.

@agpfl what pack did you buy from Techdirect? was it this one.
https://www.ebay.com/itm/48v-NEC-A12...72.m2749.l2649

[billybobRXV]

I've been running the RoyPow 105ah in my 16 RXV for about a month now. I use it mostly for golf and some around the neighborhood. Weight difference is very noticeable (~300 lbs) and I don't see a need to adjust any of the suspension with the weight loss. I'm on the course most every day (sometimes range/club, sometimes 9 holes, sometimes 18+ holes) and I go for days before charging. So far, extremely happy with the swap.

[trevorg7]

Originally Posted by billybobRXV

I've been running the RoyPow 105ah in my 16 RXV for about a month now. I use it mostly for golf and some around the neighborhood. Weight difference is very noticeable (~300 lbs) and I don't see a need to adjust any of the suspension with the weight loss. I'm on the course most every day (sometimes range/club, sometimes 9 holes, sometimes 18+ holes) and I go for days before charging. So far, extremely happy with the swap.

I am looking for the same RoyPow solution for my '16 RXV. What controller do you have in your cart?

Thanks

[rabbitreborn]

Originally Posted by trevorg7

I am looking for the same RoyPow solution for my '16 RXV. What controller do you have in your cart?

Thanks

I've done the RoyPow pack with a 600amp Navitas controller and had no issues. Cart has been running on it for almost a year now. The only issue I have with the Roy Pow pack is that the ribbon cables they use internally need to be longer to prevent them from coming unplugged. I've had 2 so far that were giving errors for bad thermal when in actuality the error was a ribbon cable connector that came apart.