PCX-950s

jakesnake27 · 09-18-2020, 11:21 AM

Sweet

EzgoNewbie305 · 12-22-2020, 04:20 PM

Hi guys, I spoke to a tech at d&d about motor suggestions and they recommend that I get an ES 63-47. That put me in a at about double the torque and speeds between 21-24. They said they have a policy about carts not going over 25 mph. They have been involved in a few law suites. I’m hoping for closer to 30. Anyways he said these carts came with a different gear ratio. It’s not 12.44 it something like 14.58. That would explain how they were able to run these carts with the same stock motor and why they are slow. Anyone else ever come across this?

scottyb · 12-22-2020, 05:36 PM

Yes, I have one of these. It is low geared & inherently slow. Another thread on here calls it out at 14.78:1. That's lower & slower than a stock cart.

EzgoNewbie305 · 12-22-2020, 06:21 PM

Yea, 14.78. I found where I wrote it down. It makes sense but now picking a motor should be a bit more tricky. All the math in references to speed and torque are based on 12.44...I just want to go 30 without loosing my mind.

scottyb · 12-22-2020, 06:27 PM

Quote:

Originally Posted by EzgoNewbie305

Yea, 14.78. I found where I wrote it down. It makes sense but now picking a motor should be a bit more tricky. All the math in references to speed and torque are based on 12.44...I just want to go 30 without loosing my mind.

You want to go 30 mph in this cart!? Really? Not me but, Okay well, you know who to call ~ PQ motors

EzgoNewbie305 · 12-22-2020, 07:38 PM

Quote:

Originally Posted by scottyb

You want to go 30 mph in this cart!? Really? Not me but, Okay well, you know who to call ~ PQ motors

No one likes this idea but me.. it’s either really bad or really good. I’ll email you directly Scotty.

mfinnegan · 12-23-2020, 06:02 AM

i like the idea, although it's scary as all hell LOL i been there on mine.

i got the 170-004-0001 high torque motor from them and just accepted this thing is just a low, slow torque monster that eats however much weight i put on it for breakfast.

have fun man!

EzgoNewbie305 · 01-19-2021, 01:10 AM

Hi guys. I got a question for you guys. My cart never came with any kink of dash so I wasn’t the person that unplugged and I’m redoing it but I’m lost. One of the harnesses has a couple of gray wires that I don’t know what they belong to. I have the manual, but I can’t seem to find them. There are 2 black ground wires, a green from the positive battery for the state of charge, a spare white/yellow and a spare white/green an da yellow for the the hour meter, but I don’t know what the gray wires hook up to. Any ideas??

EvanH34 · 03-10-2021, 03:18 PM

Hey everyone. I currently have a 960 that I converting from a beer cart over to a 956 for seating for the family at the lake. Anyone know where a guy can get the seat bases’ from? Also dash is all brittle and smashed anyone find a dash kit for these or do I make my own out of fibreglass? Thanks

EzgoNewbie305 · 03-10-2021, 03:45 PM

Quote:

Originally Posted by EvanH34

Hey everyone. I currently have a 960 that I converting from a beer cart over to a 956 for seating for the family at the lake. Anyone know where a guy can get the seat bases’ from? Also dash is all brittle and smashed anyone find a dash kit for these or do I make my own out of fibreglass? Thanks

I made my dash out of starboard. Someone else made theirs out of diamond plate. There aren’t any kits that I have heard of, but the sky’s the limit with a blank canvas.

09-18-2020, 11:21 AM	#111
jakesnake27 Gone Wild Join Date: Aug 2009 Posts: 14,245	Re: PCX-950s Sweet
jakesnake27 Gone Wild Join Date: Aug 2009 Posts: 14,245

12-22-2020, 04:20 PM	#112
EzgoNewbie305 Gone Wild Join Date: Mar 2017 Location: Miami Posts: 157	Re: PCX-950s Hi guys, I spoke to a tech at d&d about motor suggestions and they recommend that I get an ES 63-47. That put me in a at about double the torque and speeds between 21-24. They said they have a policy about carts not going over 25 mph. They have been involved in a few law suites. I’m hoping for closer to 30. Anyways he said these carts came with a different gear ratio. It’s not 12.44 it something like 14.58. That would explain how they were able to run these carts with the same stock motor and why they are slow. Anyone else ever come across this?

12-22-2020, 05:36 PM	#113
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: PCX-950s Yes, I have one of these. It is low geared & inherently slow. Another thread on here calls it out at 14.78:1. That's lower & slower than a stock cart.

12-22-2020, 06:21 PM	#114
EzgoNewbie305 Gone Wild Join Date: Mar 2017 Location: Miami Posts: 157	Re: PCX-950s Yea, 14.78. I found where I wrote it down. It makes sense but now picking a motor should be a bit more tricky. All the math in references to speed and torque are based on 12.44...I just want to go 30 without loosing my mind.

12-23-2020, 06:02 AM	#117
mfinnegan Gone Wild Join Date: Mar 2020 Location: CT Posts: 320	Re: PCX-950s i like the idea, although it's scary as all hell LOL i been there on mine. i got the 170-004-0001 high torque motor from them and just accepted this thing is just a low, slow torque monster that eats however much weight i put on it for breakfast. have fun man!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-10-2021, 03:18 PM	#119
EvanH34 Not Yet Wild Join Date: Jan 2021 Posts: 3	Re: PCX-950s Hey everyone. I currently have a 960 that I converting from a beer cart over to a 956 for seating for the family at the lake. Anyone know where a guy can get the seat bases’ from? Also dash is all brittle and smashed anyone find a dash kit for these or do I make my own out of fibreglass? Thanks
EvanH34 Not Yet Wild Join Date: Jan 2021 Posts: 3