|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
06-06-2017, 05:08 PM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2014
Posts: 25
|
Rocker Panel Rivets
Has any one else had an issue with the factory rivets not being long enough to secure the rocker panel? The rear rivets just barely fit but the front ones are too short. I know that the rocker panel is secure and I'm not worried about it coming off, It's just bugging me. I have these brand new panels with a hole in the front!
This is a 97 txt btw. Thanks, Alan... |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-06-2017, 05:35 PM
|
#2 |
|
Gone Wild
 Join Date: Aug 2009
Posts: 14,245
|
Re: Rocker Panel Rivets
I noticed this on a '97 TXT I was working on a couple of weeks ago. Mine were able to grab on the front, but barely. Maybe the newer TXTs have thinner metal there or something?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Rocker Swich Panel | Design Center | |||
| Rocker Switch Panel | Electric EZGO | |||
| Rocker panel trim removal | Electric EZGO | |||
| Rocker Panel Issues | Gas EZGO | |||
| rocker panel covers | Lifted Golf Carts | |||
Linear Mode
