key switch

reborn2363 · 10-31-2011, 11:41 PM

I have an 08 pdstxt ezgo 36 volt cart with factory lights, all the diagrams I look at show a 5 terminal hey switch but I can only find a four terminal

Re: 07 EZGO wiring diagram

--------------------------------------------------------------------------------

kgsc · 11-01-2011, 05:45 AM

reborn, that is just a 4 terminal switch with two wires from one post. Green and red on the B post.

reborn2363 · 11-01-2011, 03:10 PM

I have an 08 pdstxt ezgo 36 volt cart with factory lights, The key sitch has only four terminals but the only diagrams for wiring it up have 2, 3,or 5 terminals. can someone please help me before wy wife kills me.
thanks

Spawn · 11-01-2011, 04:15 PM

We told you that double looking terminal in the pictures is really just 1.
Use the picture on the upper left and it shows you how and what color goes to the terminals. you have a B, B1, I and L thats it for the electric carts. With a DVA meter you can test the posts but look close and you should see the code markings above on the back by the terminals.

In the diagram the B terminal looks like 2 but it is one.

JohnnieB · 11-01-2011, 05:34 PM

Download the later versions of Operators, Service and Parts Manuals for bottom STICKY: at top of this forum.

You've got a DCS manual and the color of wires changed.
Like many others have stated the "B" terminal has 2 wires attached.

Here's what the PDS Keyswitch looks like.

11-01-2011, 05:45 AM	#2
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,146	Re: key switch reborn, that is just a 4 terminal switch with two wires from one post. Green and red on the B post.

11-01-2011, 03:10 PM	#3
reborn2363 Not Yet Wild Join Date: Sep 2010 Posts: 10	Re: key switch I have an 08 pdstxt ezgo 36 volt cart with factory lights, The key sitch has only four terminals but the only diagrams for wiring it up have 2, 3,or 5 terminals. can someone please help me before wy wife kills me. thanks
reborn2363 Not Yet Wild Join Date: Sep 2010 Posts: 10

11-01-2011, 04:15 PM	#4
Spawn Gone Wild Join Date: Dec 2010 Location: Jax FL Posts: 598	Re: key switch We told you that double looking terminal in the pictures is really just 1. Use the picture on the upper left and it shows you how and what color goes to the terminals. you have a B, B1, I and L thats it for the electric carts. With a DVA meter you can test the posts but look close and you should see the code markings above on the back by the terminals. In the diagram the B terminal looks like 2 but it is one.

11-01-2011, 05:34 PM	#5
JohnnieB Techno-Nerd Join Date: Jun 2011 Location: West Virginia Posts: 19,654	Re: key switch Download the later versions of Operators, Service and Parts Manuals for bottom STICKY: at top of this forum. You've got a DCS manual and the color of wires changed. Like many others have stated the "B" terminal has 2 wires attached. Here's what the PDS Keyswitch looks like.

Similar Threads
Thread	Forum
forward/reverse switch change to toggle switch	Electric Club Car
2009 Precedent run/tow toggle switch replaced with keyed switch	Electric Club Car
Key switch & Kill switch question	Gas Club Car
Forward Reverse switch limit switch	Electric Club Car
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP!	Gas Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum