|
08-26-2009, 05:18 PM
|
#1 |
|
Getting Wild
Join Date: Jun 2007
Location: Charleston SC
Posts: 111
|
99 cc regan
I have a regan cart that will not move. The solenoids are working and good.The motor acts like it wants to turn when pedal is pressed.If you hold your hand on it it feels like a vibration.I tested motor using Nates test procedure for regan motors with 12volts and the motor spun the wheels with no problem.Any idea's?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-26-2009, 06:33 PM
|
#2 |
|
just hangin' around
Join Date: Jan 2009
Location: Oxford Flo-Rida
Posts: 1,102
|
Re: 99 cc regan
first you want to check battery pack voltage with a meter sitting still, if it looks decent, try hitting the gas and make sure the pack voltage doesnt drop significantly. Always test and retestt the batteries as a pack and individually. A bad or corroded connection will show correct voltage when not asked to carry a load, and then could drop way off or arc out and show no voltage when pedal is pressed...crud and corrosion is able to carry a false 50V signal
|
|
|
|
|
08-26-2009, 08:25 PM
|
#3 |
|
Getting Wild
Join Date: Jun 2007
Location: Charleston SC
Posts: 111
|
Re: 99 cc regan
It was 51 volts and no change when peddle is pressed. On thing i noticed is all solenoids are working and after pressing gas a few times everything quits working. If you switch it to tow then back to run they start to work again.It seems to reset something.Could the obc cause this.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| how to tell if it is a regan | Electric golf carts | |||
Linear Mode
