|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-15-2016, 05:31 PM | #1 |
Gone Wild
Join Date: May 2011
Location: Pickens/Dacusville s.c.
Posts: 1,386
|
xct 400 pds question
I was wondering the XCT 400 says 460A peak power >>> now question is when i am in there programming it even tho the "slider" only goes to 400 A you can change the numerical box to what ever "i guess" if i do will i get more amps out of it or is the limit 400 ? A and where does the 460 come in ?? BTW'S SCOTTY I AM SUPER PLEASED WITH THIS SETUP BIG PROPS TO CARTS UNLIMITED FOR THE HOOK UP !!!!!!!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-15-2016, 05:36 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: xct 400 pds question
the checkbox labeled "peak amp mode" is the one that allows the extra juice. just slide the slider all the way & check the box.
|
05-15-2016, 05:39 PM | #3 |
Gone Wild
Join Date: May 2011
Location: Pickens/Dacusville s.c.
Posts: 1,386
|
Re: xct 400 pds question
|
05-15-2016, 05:42 PM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: xct 400 pds question
1.21jw
|
05-15-2016, 05:42 PM | #5 |
Gone Wild
Join Date: May 2011
Location: Pickens/Dacusville s.c.
Posts: 1,386
|
Re: xct 400 pds question
both of mine are maxed out slider wise bu they only go to 400 but the numerical box can go beyond 400
|
05-15-2016, 05:43 PM | #6 |
Gone Wild
Join Date: May 2011
Location: Pickens/Dacusville s.c.
Posts: 1,386
|
Re: xct 400 pds question
|
05-15-2016, 05:48 PM | #7 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: xct 400 pds question
|
05-15-2016, 06:09 PM | #8 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: xct 400 pds question
1.21gw --- Doc Brown mispronounced Gigawatts as Jigawatts.
The Controller Settings screen is a bit different for a XCT than it is for a SPM and the like... To get the 460A: 1. you have to have a fan installed. 2. you have to have a speed sensor connected. 3. you have to have the Enable Speed Limit box selected. 4. you have to have the Turbo box selected. 5. you have to have the Hunting Buggy box selected. |
05-15-2016, 06:56 PM | #9 |
Gone Wild
Join Date: May 2011
Location: Pickens/Dacusville s.c.
Posts: 1,386
|
Re: xct 400 pds question
1. Check
2. Check 3. Check 4. Check 5. Oooooo nope !! |
05-15-2016, 07:53 PM | #10 |
Gone Wild
Join Date: Sep 2015
Posts: 572
|
Re: xct 400 pds question
Does any of this apply to the 500 XCT?
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
1990 Club car With flat head Rev limiter question and govenor question | Gas Club Car |