|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-28-2018, 08:36 AM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2017
Location: Bradenton, FL
Posts: 60
|
06 TXT brake pulsing issue
I installed new hubs, new shoes and new cables. I adjusted the star wheels fro correct friction. Turning hubs by hand results in alternating heavy to light friction about every 1/2 turn. It happens on both sides of the cart. This is the second set of hubs and shoes. Significantly better with this set, but still annoying under heavy braking. Hubs out of round maybe?
FYI, all axles, axle bearings and seals are new in the last 90 days. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-28-2018, 08:58 AM
|
#2 |
|
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,114
|
Re: 06 TXT brake pulsing issue
The high spots are normal, so Ill say you are correct on your adjustment.
Because its an ezgo, Id scuff the drums. For me I use a cutoff wheel on the inside of the drum. Its just a light scuff to "give it some color" so to speak. This will correct your issue |
|
|
|
|
07-28-2018, 09:58 AM
|
#3 |
|
Not Yet Wild
Join Date: Aug 2017
Location: Bradenton, FL
Posts: 60
|
Re: 06 TXT brake pulsing issue
Thanks for the quick reply. I hadn't thought of that, but it makes sense. I'll give it a try. Really doubt I could find a place to turn these small drums.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| brake noise and pulsing | Electric Club Car | |||
| 95 g14 pulsing | Gas Yamaha | |||
| 01 DS Motor pulsing | Electric Club Car | |||
| Alltrax pulsing | Electric Club Car | |||
| Pulsing under load | Electric Club Car | |||
Linear Mode
