|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-15-2018, 08:23 AM | #1 |
Gone Wild
Join Date: Apr 2015
Posts: 461
|
2007 Ezgo pds no movement
2007 pds golf cart
No movement no solenoid click Unless im testing wrong. I have -37v at the key switch I know this should be positive. I’ve change controller and ITS based on a few post but still nothing. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-15-2018, 11:23 AM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2007 Ezgo pds no movement
Since the battery pack's main negative terminal is where the black test lead should be attached for all voltage measurements, unless otherwise stipulated, all voltage readings ought to be positive, and those otherwise stipulated should also be positive when stipulated correctly.
When stipulating a voltage measurements, where to place the black lead should be stated first. IE: Controller's B- to M- terminals or M- to B+ terminals are voltage measurements I often ask for. Verify the Black test lead is plugged into the Common jack on the DVM. -------------- No solenoid click. First thing to check is for battery pack voltage (38.2V fully charged) on J1 pin 4. (Also check for pack voltage on Pin-5) |
|
|
Similar Threads | ||||
Thread | Forum | |||
98 EZGO TXT no movement | Electric EZGO | |||
36V EZGO PDS cart solenoid clicks but no movement | Electric EZGO | |||
06 EZGO TXT No Movement. Elec problem | Electric EZGO | |||
EzGo 48 volt power good no movement | Electric EZGO | |||
1988 EZGO Gas Marathon no movement | Gas EZGO |