|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-25-2019, 03:28 PM | #1 |
Not Yet Wild
Join Date: Jan 2019
Location: indy
Posts: 14
|
xi 875 industrial cart reverse buzzer
finishing up my 875. the reverse buzzer was missing. i pretty sure i found the black wire. but hooking up the red wire is where i am having issues. on the 2 micro switches on the fnr switch there is a red/purple and an orange/blue. the wiring diagram i have doesnt show the orange wire but with a little research i thought that it was for the speed controller to limit reverse speed and this is where the red wire for the buzzer went. but when connected it buzzes in forward and reverse. i touched it to all the terminals on the micro switches and none of them seemed to only work in reverse. any idea on where to hook up the red lead for the buzzer.
serial number is 11164 manfacturing code is j1192 thanks jeremy |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-25-2019, 04:00 PM | #2 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: xi 875 industrial cart reverse buzzer
Industrial carts may have different colors, but there are two microswitches on the back of the FNR. One closes only in reverse, and the other closes in forward and reverse, but opens in neutral, if that helps.
I've attached a standard wiring diagram for a series cart, which yours is - microswitches on the FNR. You may have a bad microswitch or it may be maladjusted/bent. Does the cart run at only 1/2 speed in reverse? |
03-25-2019, 05:19 PM | #3 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: xi 875 industrial cart reverse buzzer
Here is a service manual for a 92 XI-875
|
03-25-2019, 05:52 PM | #4 |
Not Yet Wild
Join Date: Jan 2019
Location: indy
Posts: 14
|
Re: xi 875 industrial cart reverse buzzer
well i took it out and ran it and it goes same speed in reverse and forward. is that the only thing that micro switch does is derate the motor? what kind of adjustments/ or trouble shooting can you do on the micro switch, i assume it is on or off.
thanks jeremy |
03-25-2019, 06:56 PM | #5 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: xi 875 industrial cart reverse buzzer
No real adjustment, but you can visually confirm that the switch you need to attach the beeper to closes only in reverse. I didn't know whether you had a handheld multimeter to test the switches. I also suspect the beeper may have been put on the wrong microswitch. Does the beeper sound with the FNR in neutral?
|
03-25-2019, 07:15 PM | #6 |
Not Yet Wild
Join Date: Jan 2019
Location: indy
Posts: 14
|
Re: xi 875 industrial cart reverse buzzer
there was no beeper i just got one today.i do have a multimeter and can test the switch. when i hooked it up to the microswitch i thought is should go to (orange wire) it would work in forward and reverse not in neutral.
|
03-25-2019, 07:19 PM | #7 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: xi 875 industrial cart reverse buzzer
I think you're on the wrong microswitch. Test the other one. The correct one will only close in neutral. Look at the attachment JohnnyB sent you, and see if it has a wiring diagram. Assuming an industrial cart has 1/2 speed reverse, it sounds like that microswitch may not be functional.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Reverse buzzer stays and cart won’t move | Electric EZGO | |||
Hot resistor, burned pin 5, no reverse buzzer, cart won't move | Electric EZGO | |||
Reverse Buzzer Alway On, Cart No Go | Electric Club Car | |||
2010 Yamaha 48v golf cart reverse buzzer always on | Electric Yamaha | |||
reverse buzzer only works when cart hot? | Electric EZGO |