|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-02-2019, 05:51 AM | #1 |
Not Yet Wild
Join Date: Jun 2019
Posts: 23
|
Jake’s Spindle Lift
I recently put a 6” Jake’s Spindle Lift on my 2002 Ezgo Txt Pds 36V Cart. I also have new 22/11/12 Wheels and Tires installed at the same time. I have replaced the front axel, tie rod, steering box, and steering wheel. My question is: When the cart is parked and the parking break is set and I push on the front passenger tire it seems stiff with no movement. But when I push on the driver side tire while in park I get a little movement and notice the axel bends back a little and the toe rod moves a little. I know the passenger side has both the Steering Box and tie rod connected to it and the driver side only has the tie rod connected to it. So is this slight movement or rocking normal for the cart or should both tires be rock solid with absolutely no movement? Thanks and sorry for the long post.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
Tags |
ezgo, jakes 6" spindle lift |
|
|
Similar Threads | ||||
Thread | Forum | |||
Can I fit 22x11-10” tires under a Jake’s 3” spindle lift?0 | Electric Club Car | |||
Jake’s 6” Spindle lift & Wheel Option | Lifted Golf Carts | |||
Shake on Brake / 6 inch Jake spindle Yamaha drive | Lifted Golf Carts | |||
Marathon Lift questions....Econ lift vs Jake 4" | Lifted Golf Carts | |||
Jake Lift on G1 | Gas Yamaha |