|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-10-2020, 07:56 AM | #1 |
Not Yet Wild
Join Date: Oct 2020
Posts: 1
|
Charger only 2 amps after fuse and heat sink replacement
I had my cart plugged in and it had been charging. I turned it on to top it off and the fuse on the charger blew. I replaced the fuse and the heat sink/ diodes with new from Amazon. When I went to charge again the charger only puts out 2 amps.
My batteries are old and will be replaced next season. It’s a Lester 8714 charger, 36 v Most likely a battery problem? Why would a diode short out? I had one diode that had continuity both directions, that’s why I changed the heat sink. Any ideas? Thank you!! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Heat sink for HEI upgrade | Gas EZGO | |||
heat sink | Electric golf carts | |||
heat sink | Extreme DC! | |||
Heat sink | Electric EZGO | |||
pds motor heat sink | Electric EZGO |