Faster and more versitile

[Stevegrmich]

Originally Posted by MrFreeze

It is not easy for me to get my cart to a dealer, no trailer and the dealer is 30 miles away. So, $140 doesn't seem to bad if it works and does not damage the cart.

. . . people that have used them say they seem to work fine . . and if you change carts, the SpeedyLink goes with you . . .

This is not an endorsement, but just providing a link for you:

Speedy Link

[ArmyVetSgtAdkins]

I know I seen them cheaper somewhere

[jakesnake27]

Originally Posted by Stevegrmich

. . . Speedy Link = $140

. . . Speed Code 4 from my CC dealer = $106 with tax . . .

I was just about to say that speedylinks are more than the upgrade!
You beat me to it.

[MrFreeze]

Originally Posted by Speedchaser

Hey Freeze, look up speed magnets on ebay, they are like $40 and accomplish the same task as any o the other options mentioned. Just want to make sure you have the advance motor whereby the speed sensor attaches to the motor with two screws. Get a flashlite and peak through the passenger rear wheel area to see the back of the motor.

Maybe this should be the first thing that I try. If I am not happy with the performance I haven't lost much. I saw some on Ebay for $25.

[MrFreeze]

http://www.phoenixamerica.com/produc...et_wheels.html

I found the Magnet here for $9.53 + shipping.

[Stevegrmich]

Originally Posted by MrFreeze

http://www.phoenixamerica.com/produc...et_wheels.html

I found the Magnet here for $9.53 + shipping.

. . . which one are you looking at?

[Speedchaser]

Not familiar with that vendor, get a club car specific magnet just to be sure, a little more money but at least you know what you are getting.

[MrFreeze]

Originally Posted by Stevegrmich

. . . which one are you looking at?

I am getting a P16C25R4. I talked to an engineer there and he said that all you need is a 4 pole magnet that will fit in there and this one will. He also said that this is the one that many others have been using for this application. For $10 dollars I am willing to take the chance that he is correct.

[Stevegrmich]

Originally Posted by MrFreeze

I am getting a P16C25R4. I talked to an engineer there and he said that all you need is a 4 pole magnet that will fit in there and this one will. He also said that this is the one that many others have been using for this application. For $10 dollars I am willing to take the chance that he is correct.

. . . let us know how it works out . . .

[MrFreeze]

Originally Posted by Stevegrmich

. . . let us know how it works out . . .

I will do that. By the way, nice Avatar! When was it taken? I grew up in Grand Rapids and it brings back memories.