|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
07-21-2018, 09:17 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2018
Posts: 23
|
Club Car Precedent 09 - Can not remove bolt on Rear Leaf
I have a 09 Club Car Precedent. Was attempting to get some new bushings in rear leaf spring. The back bolt will not come out of the spring or bracket? Any thoughts or solutions?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-21-2018, 10:12 PM
|
#2 |
|
Not Yet Wild
Join Date: Jul 2018
Location: Northwest IN
Posts: 12
|
Re: Club Car Precedent 09 - Can not remove bolt on Rear Leaf
Some heat and a hammer?
I just changed my leafs on my 13’ CCP and I was lucky it all came apart easy. Sent from my iPhone using Tapatalk |
|
|
|
|
07-21-2018, 10:31 PM
|
#3 |
|
Gone Wild
 Join Date: May 2015
Location: Houston
Posts: 903
|
Re: Club Car Precedent 09 - Can not remove bolt on Rear Leaf
A two pronged pulley puller with center bolt will push the bolt / break the bolt free in the bushing. Use the old nut screwed on the end slightly to be used as the push point by the center shaft of the pulley puller. Essentially you’re using the pulley puller in reverse.
I’ve had to do this a few times. Once it’s broken free, it will then usually come out. |
|
|
|
|
07-22-2018, 09:00 AM
|
#4 |
|
Gone Wild
Join Date: Apr 2017
Location: SE TN
Posts: 2,227
|
Re: Club Car Precedent 09 - Can not remove bolt on Rear Leaf
DeWalt battery operated impact tools and PB Blaster.
|
|
|
|
|
07-22-2018, 09:43 AM
|
#5 |
|
Gone Wild
Join Date: Jan 2017
Location: Miami, FL
Posts: 1,061
|
Re: Club Car Precedent 09 - Can not remove bolt on Rear Leaf
It’s probably seized in the metal sleeve that goes inside the bushing. Htown’s method is one solution if you have such a puller. Heat is also effective. If not, use a sawzall on the inside of the mounting tabs to cut each end of the bolt off. Then just buy a new bolt, the bushing kit will come with a new sleeve. I always grease or never seize the bolts when installing so they come apart later.
|
|
|
|
|
07-22-2018, 03:06 PM
|
#6 |
|
Gone Wild
Join Date: Feb 2017
Location: Liberty Hill, Texas
Posts: 472
|
Re: Club Car Precedent 09 - Can not remove bolt on Rear Leaf
A big "second" to the sawzall technique..... used it many times !
|
|
|
|
|
07-22-2018, 09:12 PM
|
#7 |
|
Not Yet Wild
Join Date: Jun 2018
Posts: 23
|
Re: Club Car Precedent 09 - Can not remove bolt on Rear Leaf
Thanks everyone. End the end I went with the sawzall. Thanks for the input. Saved me some time.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| rear leaf spring shackles precedent 2008 | Electric Club Car | |||
| Club Car Precedent Rear Leaf springs | Electric Club Car | |||
| Club Car Precedent Dual Action Heavy Duty Overload Leaf Spring For CC Precedent | Electric Club Car | |||
| How To Remove Eye Bolt From Leaf Spring | Gas Club Car | |||
| remove fan hub bolt | Gas EZGO | |||
Linear Mode
