08-12-2018, 02:30 PM | #1 |
Gone Wild
Join Date: Jun 2009
Location: Ontario Canada
Posts: 180
|
cutting out
2004 precedent 48 volt take off with it and above or around half throttle it quits and if you let the throttle back off it starts moving again. if you push the throttle down quick it wont move at all. it has a new controller and throttle pedal and speed sensor.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-12-2018, 11:19 PM | #2 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: cutting out
The Potentiometer in your MCOR is failing and will need to be replaced. https://www.revolutiongolfcars.com/mcors
Call David if you are not sure which pedal design you have. |
08-13-2018, 04:32 PM | #3 |
Gone Wild
Join Date: Jun 2009
Location: Ontario Canada
Posts: 180
|
Re: cutting out
its new . so maybe a bad wire between pedal and controller
|
08-13-2018, 07:47 PM | #4 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: cutting out
Sounds like low voltage to me. What's the total battery pack voltage when measure with a multimeter?
|
08-14-2018, 05:23 PM | #5 |
Gone Wild
Join Date: Jun 2009
Location: Ontario Canada
Posts: 180
|
Re: cutting out
its at 48. i hooked a multi meter up and watch it while i depressed the acc. there was no major drop. maybe ill try hooking to the motor and see if there is a drop.
|
08-27-2018, 08:51 PM | #6 |
Gone Wild
Join Date: Jun 2009
Location: Ontario Canada
Posts: 180
|
Re: cutting out
I replaced the main harness today and its the same half throttle and it quits.
|
08-27-2018, 08:59 PM | #7 |
Not Yet Wild
Join Date: Jul 2018
Posts: 38
|
Re: cutting out
48v sounds low for a charged pack to me.
|
08-28-2018, 07:04 PM | #8 |
Gone Wild
Join Date: Jun 2009
Location: Ontario Canada
Posts: 180
|
Re: cutting out
I charged the cart lastnight till tonight charger had shut off and pack was at 52 so i replaced the seliniod and tried it and it does the same thing. I tried pushing the cart and got no beeping for roll away fwd or rev. When the cart came to me they had replaced the controller and the MCOR and the speed sensor. ive replaced the harness because of coroded pins and a burnt pin. and the seliniod now. Whats the magnet they talk about on some posts on here and where is it and is it replacable?
|
08-28-2018, 08:00 PM | #9 |
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: cutting out
Know you said you replaced them, but you have problem of a bad speed sensor and a bad MCOR.
|
08-28-2018, 08:07 PM | #10 | |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: cutting out
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G29 cutting out | Gas Yamaha | |||
g2 cutting out | Gas Yamaha | |||
Par car cutting out | Gas Columbia ParCar | |||
G16 cutting off | Gas Yamaha | |||
97 G16 Cutting out at WOT | Gas Yamaha |