2011 Precedent Curtis Anti tamper fault, not running

mjroman20 · 08-31-2018, 08:45 AM

A club car with a 1206HB controller? HBs are EZGO, sure its not a 1515?

Is it a 'High Speed Walkaway" fault?

nickdalzell1 · 08-31-2018, 04:57 PM

I might be mistaken on the number, sorry. It appears to be a standard stock Precedent controller for 2008+ variants. Grey box with Curtis branding.

It wasn't high speed walkaway, it did not run at all and showed as an active fault Anti-Tamper Fault.

It also ended up having three bad batteries the customer never told us about, three were reading 2V and they were all no name brands. Black box no branding at all, but 2017 year stamps. Maybe that caused it to fault but I would expect either low battery voltage or under voltage cutback in that case.

mjroman20 · 09-04-2018, 10:53 AM

Its defiantly GPS related then. There is a control mode parameter that needs to be changed from 1 to 0. It's looking for command input from the Visage GPS

08-31-2018, 08:45 AM	#11
mjroman20 Gone Wild Join Date: Apr 2015 Location: Pennsylvania Posts: 378	Re: 2011 Precedent Curtis Anti tamper fault, not running A club car with a 1206HB controller? HBs are EZGO, sure its not a 1515? Is it a 'High Speed Walkaway" fault?

08-31-2018, 04:57 PM	#12
nickdalzell1 Resident Curmudgeon Join Date: Oct 2011 Posts: 1,279	Re: 2011 Precedent Curtis Anti tamper fault, not running I might be mistaken on the number, sorry. It appears to be a standard stock Precedent controller for 2008+ variants. Grey box with Curtis branding. It wasn't high speed walkaway, it did not run at all and showed as an active fault Anti-Tamper Fault. It also ended up having three bad batteries the customer never told us about, three were reading 2V and they were all no name brands. Black box no branding at all, but 2017 year stamps. Maybe that caused it to fault but I would expect either low battery voltage or under voltage cutback in that case.

09-04-2018, 10:53 AM	#13
mjroman20 Gone Wild Join Date: Apr 2015 Location: Pennsylvania Posts: 378	Re: 2011 Precedent Curtis Anti tamper fault, not running Its defiantly GPS related then. There is a control mode parameter that needs to be changed from 1 to 0. It's looking for command input from the Visage GPS

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Bad Boy Curtis Controller Fault Codes	Electric golf carts
Curtis 1268 - HPD Fault	Electric Club Car
Carryall 232 Speed Sensor Fault/ Anti tamper Fault	Electric Club Car
RXV Fault Codes - CURTIS CONTROLLERS	Electric EZGO
Curtis 1268 Fault Codes	Electric golf carts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum