09-03-2018, 12:15 PM | #11 |
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
Re: No reverse
Well looking at post 4. Looks like they have the main leads on the motor messed up. Looking at the 4 posts on the engine and tracing the wires baxk this clearly is not wierd the same as the diagram.i dont know if my cart is the same as the diagram because everything is the same but i only have one mocro switch on fnr switch
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-04-2018, 02:53 PM | #12 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,131
|
Re: No reverse
May not be the exact diagram and if it runs in forward it is just a matter of figuring out why reverse doesn't work.. Does your FNR switch have any empty connections ?
|
09-05-2018, 08:16 AM | #13 |
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
Re: No reverse
No empty con. On switch
|
09-05-2018, 12:34 PM | #14 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,131
|
Re: No reverse
We need pictures of the switch and trace where the cables go to.
|
09-05-2018, 03:16 PM | #15 |
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
Re: No reverse
Ill get some pics asap. Os it possible the cart will go foward but not reverse with the dead batts? I only say that becaise as soon as i unplug the charger i loose everything loke a solinoid wont evan click. I had read somewhere reverse is only half speed more resotance. Causing no spin issue
|
09-05-2018, 03:20 PM | #16 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,131
|
Re: No reverse
Could be but solenoid pulls very little current so unlikely. Again chase the heavy wires from the switch and tell us where they go.
|
09-05-2018, 04:03 PM | #17 |
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
Re: No reverse
Ok for the foward on the switch the large black wire that runs to one solinoid that is first inline no resistor connected to it. Then on the other side of the switxh is large white wire that runs to the oppsite sode of the solonoid bank for reverse that has the linked resistor on it.
|
09-05-2018, 04:04 PM | #18 |
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
Re: No reverse
When i depresss the pedel solinoids click as they should but no go in reverse only foward. But like i had said the batts are shot as soon as you unplug the charger nothing at all.
|
09-05-2018, 04:30 PM | #19 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: No reverse
If Your batteries are shot and the cart only runs with the charger connected, then only forward is going to work.
You need to move the big cable that goes from the FNR to battery #4 positive post to battery #1 positive post. That will give You the same 36v You are getting from the charger to the reverse circuit. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
wiring a reverse light to the reverse buzzer? | Gas Yamaha | |||
1981 Harley 3 wheel D model reverse issue/won't reverse | Gas Harley Davidson | |||
No reverse. HD forward reverse switch needed? | Electric Club Car | |||
Goes in reverse when switch is in forward. does nothing with swicth in reverse | Electric EZGO | |||
Reverse alarm stuck - motor won't run forward or reverse | Electric EZGO |