|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
09-24-2018, 10:09 AM
|
#1 |
|
Getting Wild
Join Date: Sep 2018
Location: Palm Harbor, FL
Posts: 86
|
Fried my controller, need advice for new one
I have a 2005 IQ, and while cleaning all the electrical connections I messed up and reattached the battery cables before cleaning the motor connections and sparked across A2 and F2, which I have read on here can fry the controller, and sure enough, the cart is dead. I hear the solenoid clicking but I get no movement at all.
I would like a bit more speed. Everything is stock. What are the affordable & reliable options for replacing the controller and ending up a bit faster? Should I go OEM/Curtis and speed code 4, Alltrax XCT300IQ, or are there other good options? Will I have to upgrade the solenoid or can I leave everything else stock? Thanks for any advice. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-24-2018, 10:29 AM
|
#2 |
|
Gone Wild
Join Date: Dec 2017
Location: Montreal, Quebec, Canada
Posts: 1,130
|
Re: Fried my controller, need advice for new one
Reach out to a site sponsor. Either ScottyB at Carts Unlimited or Dave H at Revolution Golf Carts. They can set you up with an Alltrax for roughly what it would cost you to get a new stock controller. You will get better performance and more options with Alltrax....
|
|
|
|
|
09-24-2018, 10:48 AM
|
#3 |
|
Gone Wild
Join Date: Apr 2017
Location: SE TN
Posts: 2,226
|
Re: Fried my controller, need advice for new one
And to those of you who haven't sparked across your motor terminals yet. Here is some cheap insurance when working down there.
https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1 Also go with the Alltrax controller |
|
|
|
|
09-24-2018, 12:08 PM
|
#4 |
|
Getting Wild
Join Date: Sep 2018
Location: Palm Harbor, FL
Posts: 86
|
Re: Fried my controller, need advice for new one
Good idea on the terminal protectors. I think I'll order some with the new controller.
|
|
|
|
|
09-24-2018, 04:58 PM
|
#5 |
|
MOD of all BS!
 Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Fried my controller, need advice for new one
No question an Alltrax! More user friendly, stronger and faster and much cheaper than an OEM...
Look here https://www.revolutiongolfcars.com/c...-club-car-prec |
|
|
|
|
09-24-2018, 07:11 PM
|
#6 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,402
|
Re: Fried my controller, need advice for new one
Don't look here > http://www.cartsunlimited.net/alltrax-xct-sepex--.html
 |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Fried controller? | Electric EZGO | |||
| Speed Controller DCS fried | Electric EZGO | |||
| Controller Fried? | Electric EZGO | |||
| Fried Controller | Electric EZGO | |||
| Motor or Controller Fried | Electric Club Car | |||
Linear Mode
