|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-30-2018, 07:02 PM | #1 |
Gone Wild
Join Date: Oct 2014
Posts: 353
|
Stock controller mount
Does the stock controller on a PH precedent use the mounting plate as a heat sink? The cover with the tow run switch.
I am relocating components during my LiPo install, and don’t want to risk burning up the stock controller if it needs that mounting plate to dissipate excess heat. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-30-2018, 09:04 PM | #2 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Stock controller mount
Yes, it uses that aluminum panel to disperse heat.
|
10-01-2018, 12:00 PM | #3 |
Gone Wild
Join Date: Oct 2014
Posts: 353
|
Re: Stock controller mount
Thanks!
Guess I will leave it in the stock location, and move the controller when I upgrade. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Navitas TSX 440A Controller, Harness for Club Car IQ-up and Dash-Mount OTF Controller | Golf Carts and Parts | |||
stock txt with stock controller what size fuse | Electric EZGO | |||
Stock controller and Stock Solenoid from PDS for sale | Golf Carts and Parts | |||
where to mount controller? | Design Center | |||
Where does it mount, Controller and OBC | Electric Club Car |