Center caps

[Mooncarter]

A center cap would take up about 1/16" on the back side of the wheel.

[Hit it like a champ]

First picture is the front. Second pics the rear wheel you can see the wheel spacer. I put a 1 1/2’’ wheel spacer in the back to make the width the same as the front. For some reason the all sport 6’’ a arm lift kit made the front stance wider.

[NCPW]

That's pretty odd looking

[Hit it like a champ]

Ok from reading other threads it looks like i just need the dome type center caps that will go over the front spindle. I probably could put the flat style in the back if I knew exactly what to order.

[Hit it like a champ]

Before wheel spacer

[bobbycason]

The front is basically the same hub with dust cover as what would be found on a trailer with the bearing mounted in the hub where as the rear is gear driven so the bearings are on the axle tube.

[Hit it like a champ]

Originally Posted by bobbycason

The front is basically the same hub with dust cover as what would be found on a trailer with the bearing mounted in the hub where as the rear is gear driven so the bearings are on the axle tube.

Ok so 4 regular center caps will fit then right

[bobbycason]

Originally Posted by Hit it like a champ

Ok so 4 regular center caps will fit then right

I would assume if they fit on the front it would fit on the back, the center holes shouldn't be different sizes. In the front they just need to clear the hub assembly, the back really doesn't matter.

something like this https://www.golfcarttiresupply.com/s...2-65-set-of-4/

[Mooncarter]

Originally Posted by NCPW

That's pretty odd looking

It looks like he has a spacer on the outside.

[Mooncarter]

[QUOTE=bobbycason;1569581]I would assume if they fit on the front it would fit on the back, the center holes shouldn't be different sizes. In the front they just need to clear the hub assembly, the back really doesn't matter.

something like this https://www.golfcarttiresupply.com/s...2-65-set-of-4/[/QUOTE