![]() |
|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Gone Wild
![]() ![]() Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,574
|
![]() I just got a 2000 cart that the previous owner towed without switching the run/tow switch. I figured cooked controller and/or motor but I got a good deal so I jumped on it. Well it turns out batts are dead too but it was still worth the money. Anyway, I pulled the cover and was surprised to find a PDS controller. It has the FNR lever under the seat where a DCS would be and nothing looks as if it was rigged. I haven't had a chance to test anything as the Sol was cooked/melted and I'm working on getting batts. Anybody seen this configuration ?
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Gone Wild
![]() ![]() Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
![]() OK - Some of the very early PDS carts still ran the older style DCS F/R systems. I've only seen this one time before, but what you have described is actually correct..
|
|
|
![]() |
![]() |
![]() |
#3 |
Gone Wild
![]() ![]() Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,574
|
![]() Cool. Figures I'd get something oddball.. Gonna put my old WR stock sol and resistor on it tomorrow and just run jumper cables from my current cart and see what happens. May disconnect the motor first to see if controller is ok. Thanks for the help.
|
![]() |
![]() |
![]() |
#4 |
Gone Wild
![]() ![]() Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
![]() Not oddball - Just unique
![]() ![]() ![]() I't could be worse, you could have a DCS ![]() ![]() ![]() Post your model number / serial number so I can figure a build date... |
|
|
![]() |
![]() |
![]() |
#5 |
Say What ???
![]() Join Date: Aug 2008
Location: DFW Texas Baby !!
Posts: 621
|
![]() |
![]() |
![]() |
![]() |
#6 |
Gone Wild
![]() ![]() Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,574
|
![]() Ditto...
C300 1257520 |
![]() |
![]() |
![]() |
#7 |
Gone Wild
![]() ![]() Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
![]() LOL - Wasn't thinking of you on that one, but now that you mention it.......
I was referring to the model year - could have gone both ways on the DCS or PDS... C300 is March of 2000, I would have thought it would have been earlier? Oh well. Thanks for sharing!!! |
|
|
![]() |
![]() |
![]() |
#8 |
Gone Wild
![]() ![]() Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,574
|
![]() Replaced sol and resistor today, checked the main wires, ran jumper cables to another cart for 36vt, hit the key and zilch. No reverse beep nothing... Then realized flipping the run/tow switch would probably help ;) Everything works YEA !! Working on other hardware issues but main electrics are good. Now I gotta find some batteries.
|
![]() |
![]() |
![]() |
#9 |
Stay thirsty my friends!
![]() ![]() Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,351
|
![]() OOOPS! Glad it checks out! Those darn switches.......
|
![]() |
![]() |
![]() |
#10 |
Gone Wild
![]() ![]() Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,574
|
![]() I was soo busy keeping fingers crossed and covering my face getting ready for the fire, I forgot the switch!!
|
![]() |
![]() |
![]() |
Tags |
dcs pds controller |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
2000 TXT.....slow to go. Controller again? | Electric EZGO | |||
Is there a better setup for D395 motor/ controller combo? | Electric Club Car | |||
2000.5 Club Car Controller | Electric Club Car | |||
2000 TXT trouble shooting chart says my controller is bad, any help? | Electric EZGO |