Rear driven clutch pulley 90 CCDS

BLACK DEATH · 03-04-2010, 08:23 PM

I bought a new Gates belt thinking it was stretched or worn out cause there was so much slack that i could see it hanging and it has no low end torque but lots of speed. Well come to find out the belt is riding in the middle, bottom or inside the rear driven pulley. It is not riding on the top of the pulley / clutch as what has been stated in other threads. I see the spring and the part that compresses or moves is touching the other part when it opens up. Looks like it may be fully open. So my question is, is it broken, can it be fixed or needs replacing or im just gonna have to take it off to find out the hard way? Which I dont mind doing. Now how to fix it if fixable? Or just replace it? How much does one cost or to get a good deal on one? I think the dealer quoted $250 or $150for the drive or driven clutch to me here locally and both in stock. Id rather support our sponsors than a local CC dealer as they dont help much.

FIXEROFCARTS · 03-04-2010, 09:14 PM

Might just need cleaned and lubed to open fully. Pull it off and see if it is OK, driven clutches are easy to take apart.

BLACK DEATH · 03-04-2010, 10:47 PM

Thanks, what do you lube it with? Regular greese or? Is this clutch the same as a 99 CC?

scottyb · 03-04-2010, 10:58 PM

Club Car clutches run dry. I don't know what he was talking about ? Graphite ?

Hill Country Hunter · 03-05-2010, 10:50 AM

I read a post by Wass in the past that suggested that emory cloth could be used to smooth the shaft and the inner sheath it slides in, if the clutch halves are not sliding freely. No lubricant though.

GLEEMO · 03-05-2010, 11:35 AM

Hope this helps ?

lockman1 · 03-05-2010, 02:44 PM

That's a much better pic then mine in the other thread!

BLACK DEATH · 03-05-2010, 04:28 PM

Cool, nice pic gleemo. Time to pull her off and see what the deal is

BLACK DEATH · 03-05-2010, 09:52 PM

ok i got the clutch off but it will not come apart. I took the #2 part, in the picture, retaining clip off. It should come apart but isnt. Any thoughts to get it apart so I can clean it up to see if its still good?

GLEEMO · 03-06-2010, 07:01 PM

Did the spring come off ?
Did the key stay on the shaft or is it stuck up inside the pully ?

Yep spray it with some rustbuster/wd40 put it in the vice and use the old pully belt to yank on it a few times to break it loose !

03-04-2010, 08:23 PM	#1
BLACK DEATH Gone Wild Join Date: Dec 2009 Location: Corpus Christi, TX Posts: 1,644	Rear driven clutch pulley 90 CCDS I bought a new Gates belt thinking it was stretched or worn out cause there was so much slack that i could see it hanging and it has no low end torque but lots of speed. Well come to find out the belt is riding in the middle, bottom or inside the rear driven pulley. It is not riding on the top of the pulley / clutch as what has been stated in other threads. I see the spring and the part that compresses or moves is touching the other part when it opens up. Looks like it may be fully open. So my question is, is it broken, can it be fixed or needs replacing or im just gonna have to take it off to find out the hard way? Which I dont mind doing. Now how to fix it if fixable? Or just replace it? How much does one cost or to get a good deal on one? I think the dealer quoted $250 or $150for the drive or driven clutch to me here locally and both in stock. Id rather support our sponsors than a local CC dealer as they dont help much.

03-04-2010, 10:47 PM	#3
BLACK DEATH Gone Wild Join Date: Dec 2009 Location: Corpus Christi, TX Posts: 1,644	Re: Rear driven clutch pulley 90 CCDS Thanks, what do you lube it with? Regular greese or? Is this clutch the same as a 99 CC?

03-04-2010, 10:58 PM	#4
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 74,005	Re: Rear driven clutch pulley 90 CCDS Club Car clutches run dry. I don't know what he was talking about ? Graphite ?

03-05-2010, 10:50 AM	#5
Hill Country Hunter Not Yet Wild Join Date: Jul 2009 Location: Sugar Land, Texas Posts: 29	Re: Rear driven clutch pulley 90 CCDS I read a post by Wass in the past that suggested that emory cloth could be used to smooth the shaft and the inner sheath it slides in, if the clutch halves are not sliding freely. No lubricant though.

03-05-2010, 02:44 PM	#7
lockman1 What the ....? Join Date: Jan 2007 Location: Hemingway, S.C. Posts: 15,294	Re: Rear driven clutch pulley 90 CCDS That's a much better pic then mine in the other thread!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-04-2010, 09:14 PM	#2
FIXEROFCARTS Gone Wild Join Date: Feb 2009 Location: Not sure yet Posts: 500	Re: Rear driven clutch pulley 90 CCDS Might just need cleaned and lubed to open fully. Pull it off and see if it is OK, driven clutches are easy to take apart.

03-05-2010, 04:28 PM	#8
BLACK DEATH Gone Wild Join Date: Dec 2009 Location: Corpus Christi, TX Posts: 1,644	Re: Rear driven clutch pulley 90 CCDS Cool, nice pic gleemo. Time to pull her off and see what the deal is

03-05-2010, 09:52 PM	#9
BLACK DEATH Gone Wild Join Date: Dec 2009 Location: Corpus Christi, TX Posts: 1,644	Re: Rear driven clutch pulley 90 CCDS ok i got the clutch off but it will not come apart. I took the #2 part, in the picture, retaining clip off. It should come apart but isnt. Any thoughts to get it apart so I can clean it up to see if its still good?

03-06-2010, 07:01 PM	#10
GLEEMO just leave me alone Join Date: Aug 2008 Location: Tennessee Posts: 5,643	Re: Rear driven clutch pulley 90 CCDS Did the spring come off ? Did the key stay on the shaft or is it stuck up inside the pully ? Yep spray it with some rustbuster/wd40 put it in the vice and use the old pully belt to yank on it a few times to break it loose !

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Rear end pulley on wrong side	Big Block Talk!
removing the drive pulley from rear end.	Gas EZGO
wanted cc drive clutch v belt pulley	Golf Carts and Parts
Need Workhorse Driven Pulley	Gas EZGO
1980 G1 rear drive pulley play	Gas Yamaha