lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 10-14-2015, 10:37 PM   #1
uwantsumofthis
Not Yet Wild
 
Join Date: Dec 2013
Posts: 69
Default Anyone ever pulled a driven secondary clutch

I have a 05 workhorse mpt 1200. How the f$&k do u get this driven clutch off the rear end with out breaking it. I done broke two clutches like this trying to remove them. I called ezgo tec and they said either it has the threads on the inside like the dive clutch, and can use a clutch puller. Or it's the one I have to beat off.lol. I do belive I have to beat it off. I looked for threads and none was there. They told me to use a pickle fork (aka ball joint separator). I haven't done that yet, just seeing if Yall have a better idea than me?
uwantsumofthis is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 10-14-2015, 10:46 PM   #2
uwantsumofthis
Not Yet Wild
 
Join Date: Dec 2013
Posts: 69
Default Re: Anyone ever pulled a driven secondary clutch

I have also seen a special tool that looks like a wheel puller on ebay, so I tried using a 3 claw wheel puller and snaped the cast clutch like nothing. Any one ever use this special wheel puller? It looks like a big black C with a bolt in the middle with a spacer that goes in the hole before u screw it down. My 3 claw wheel puller only grabbed the outside of the clutch, could b the reason for it snapping. This tool looks like it grabs both sides of clutch.
uwantsumofthis is offline   Reply With Quote
Old 10-14-2015, 11:03 PM   #3
uwantsumofthis
Not Yet Wild
 
Join Date: Dec 2013
Posts: 69
Default Re: Anyone ever pulled a driven secondary clutch

Has any body used this puller
Attached Images
File Type: jpg image.jpg (22.9 KB, 0 views)
uwantsumofthis is offline   Reply With Quote
Old 10-15-2015, 06:01 AM   #4
nobuckbuild
Gone Wild
 
nobuckbuild's Avatar
E-Z-GO
 
Join Date: Mar 2012
Location: CENTRAL PENNSYLVANIA
Posts: 1,466
Default Re: Anyone ever pulled a driven secondary clutch

first off check the clutch first to see if it will walk off once the center bolt is removed, sometimes they will just slide off the splines. I know im the luckiest guy on the planet to have never had one stick or break when removing them. but i also insure that the next time i or someone else has to pull it that their is no chance of it sticking by using never sieze.
nobuckbuild is offline   Reply With Quote
Old 10-15-2015, 01:40 PM   #5
uwantsumofthis
Not Yet Wild
 
Join Date: Dec 2013
Posts: 69
Default Re: Anyone ever pulled a driven secondary clutch

I guess I'm one of the unlucky ones. I only pulled 2 and both of them broke. Update use some penetrating oil, spray inside and out. Come back a hour later and use the pickle fork. Worked well. To bad I broke it before hand. One thing I did learn if u see coin like threads on the inside the cluch, closest to gearbox. That is part of the clutch and go behind that. The actual spline holding it on has a rige on the end so the pickle for can go on. Here R the pics
Attached Images
File Type: jpg image.jpg (168.1 KB, 0 views)
uwantsumofthis is offline   Reply With Quote
Old 10-15-2015, 04:56 PM   #6
nobuckbuild
Gone Wild
 
nobuckbuild's Avatar
E-Z-GO
 
Join Date: Mar 2012
Location: CENTRAL PENNSYLVANIA
Posts: 1,466
Default Re: Anyone ever pulled a driven secondary clutch

what part of the clutch do you need, i have some spares and parts
nobuckbuild is offline   Reply With Quote
Old 10-15-2015, 11:57 PM   #7
uwantsumofthis
Not Yet Wild
 
Join Date: Dec 2013
Posts: 69
Default Re: Anyone ever pulled a driven secondary clutch

Hey no buck!!!!The cast around the clutch snapped on the inside, and out.If u have a extra clutch how much shipped to 70072?
uwantsumofthis is offline   Reply With Quote
Old 10-16-2015, 05:08 AM   #8
rib33024
......................
 
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,308
Default Re: Anyone ever pulled a driven secondary clutch

A little late, but here's some threads about Clutch removal



http://www.buggiesgonewild.com/gas-e...l-problem.html


http://www.buggiesgonewild.com/gas-e...en-clutch.html





http://www.buggiesgonewild.com/searc...RID%3A11&hl=en
rib33024 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Secondary or Driven Clutch Issues Gas Yamaha
Where to buy new performance driven clutch (secondary)? Big Block Talk!
I NEEEEED a Pre-88 Ezgo Secondary (Driven) clutch!!! ASAP!! Golf Carts and Parts
G9 secondary (driven) clutch? Gas Yamaha
ezgo secondary / driven clutch Golf Carts and Parts


All times are GMT -5. The time now is 03:07 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.