lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 10-25-2007, 07:46 PM   #1
brownleaf
Not Yet Wild
 
Join Date: Oct 2007
Posts: 29
Default 48v on stock dcs motor

Hello everyone,a newbie here.Have a 97 ezgo dcs with a stock motor.Have installed 4ga wires and a 400 amp alltrac controller.Wanting to go 48v.My question is will my stock motor handle 48v?? Thanks........
Also will change to 48v solenoid..
brownleaf is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 10-25-2007, 07:48 PM   #2
roady89
nimda
Club Car
 
Join Date: Jun 2007
Posts: 13,022
Default Re: 48v on stock dcs motor

If your controller is made to handle 48 volts then yes your motor will handle the 48 volts also. You will gain 20-25% in overall power and torque. One of the best upgrades you can do.


Oh and WELCOME to the forum!!

Last edited by roady89; 10-26-2007 at 08:38 AM.. Reason: mis-spelled a word
roady89 is offline   Reply With Quote
Old 10-26-2007, 08:18 AM   #3
brownleaf
Not Yet Wild
 
Join Date: Oct 2007
Posts: 29
Default Re: 48v on stock dcs motor

Thanks Roady for your response!!!!!!!!
brownleaf is offline   Reply With Quote
Old 10-31-2007, 01:15 PM   #4
Monsterezgokid
Kid no more!!
 
Monsterezgokid's Avatar
E-Z-GO
 
Join Date: Feb 2007
Location: Bradford, Ontario, Canada
Posts: 750
Default Re: 48v on stock dcs motor

Welcome to the 48V DCS club! you will have many fun times ripping around with your new found power, and squeeling the tires!


Well actualy you will see a major improvement over your stock speed, and take off "Umph"!.. I have been running my street cart for a year with a stock motor combo with a alltrax DCX 500.. motor still runs fine.. but i want to chekc it in the spring, and polish up the comm and check the brushes.

As a alltrax dealer here in canada, ive gotten many different tips and ways to crank the most out of these controllers, and make them shine!

Thing is you might loose your regen feature when going to 48V.. its just something that has to do with the motor not being able to produce the proper voltage back to the controller when regen is enabled, because the internal fields are designed for a 36V app..

Good luck, and happy Cartin!
Monsterezgokid is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
What motor? Big Block Talk!
50plus stock!!! Gas golf carts
motor II Big Block Talk!
motor Big Block Talk!
G9? Replacing stock air box with K&N? Gas Yamaha


All times are GMT -5. The time now is 06:31 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.