secondary clutch G16 ..spring hole question

Tawas · 07-08-2013, 08:42 PM

I have a G16 and want a little more torque than stock..secondary spring setting stock calls for B/3 on spring.. can I set it to more preload and get a little more torque with out using a aftermarket spring..I read thats not a good idea to install .. to much preload ...so what holes should I use to get more torque than stock anyone have experience doing this..if yes what hole combo should I use

Tawas · 07-08-2013, 10:07 PM

can anyone help me with this question?????and will removing the plastic washer help with anything ???

Mike Mac · 07-08-2013, 10:15 PM

tons of info on this subject right on this first page. all you gotta do is read.

Tawas · 07-08-2013, 10:42 PM

well I did read some but do not understand ..when changing my clutch spring do I keep it at B and change numbers or do I change the numbers too ..example stock is b/3 should I stay in b then go up to b/4 and so on..or do I change it to c/4 ..thats what I dont understand ??

Mike Mac · 07-08-2013, 10:51 PM

I'd do the concierge/umax spring. Its cheap and getting very popular lately. Good for stock or a hotrod!!

Keep reading, you will learn tons of modifications!!

Tawas · 07-08-2013, 11:07 PM

please send link for a unimax spring to buy please yamaha G16

Mike Mac · 07-08-2013, 11:12 PM

Cartpartplus, vender on here, or smallblock450sl. Or Yamaha dealer in town.

Tawas · 07-09-2013, 10:05 AM

still wondering if I could get some GOOD advise on my clutch question ..about just getting a little more preload on my clutch stock spring... stock its B/3 will B/4 give me more than stock or do I change it to C/4 ..is the clutch need to stay in B hole for just a bit more than stock..

DOOmsman · 07-09-2013, 01:47 PM

If you think about it and check the stock position you will see that hole 4 will increase tension.

Tawas · 07-09-2013, 06:12 PM

thank you very much ..thats all I needed to help me ..well appreciated

07-08-2013, 08:42 PM	#1
Tawas Not Yet Wild Join Date: Jun 2013 Location: Michigan Posts: 44	secondary clutch G16 ..spring hole question I have a G16 and want a little more torque than stock..secondary spring setting stock calls for B/3 on spring.. can I set it to more preload and get a little more torque with out using a aftermarket spring..I read thats not a good idea to install .. to much preload ...so what holes should I use to get more torque than stock anyone have experience doing this..if yes what hole combo should I use

07-08-2013, 10:07 PM	#2
Tawas Not Yet Wild Join Date: Jun 2013 Location: Michigan Posts: 44	Re: secondary clutch G16 ..spring hole question can anyone help me with this question?????and will removing the plastic washer help with anything ???

07-08-2013, 10:15 PM	#3
Mike Mac G8 Specialist Join Date: Jun 2009 Location: Phoenix Posts: 7,799	Re: secondary clutch G16 ..spring hole question tons of info on this subject right on this first page. all you gotta do is read.

07-08-2013, 10:42 PM	#4
Tawas Not Yet Wild Join Date: Jun 2013 Location: Michigan Posts: 44	Re: secondary clutch G16 ..spring hole question well I did read some but do not understand ..when changing my clutch spring do I keep it at B and change numbers or do I change the numbers too ..example stock is b/3 should I stay in b then go up to b/4 and so on..or do I change it to c/4 ..thats what I dont understand ??

07-08-2013, 10:51 PM	#5
Mike Mac G8 Specialist Join Date: Jun 2009 Location: Phoenix Posts: 7,799	Re: secondary clutch G16 ..spring hole question I'd do the concierge/umax spring. Its cheap and getting very popular lately. Good for stock or a hotrod!! Keep reading, you will learn tons of modifications!!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-08-2013, 11:07 PM	#6
Tawas Not Yet Wild Join Date: Jun 2013 Location: Michigan Posts: 44	Re: secondary clutch G16 ..spring hole question please send link for a unimax spring to buy please yamaha G16

07-08-2013, 11:12 PM	#7
Mike Mac G8 Specialist Join Date: Jun 2009 Location: Phoenix Posts: 7,799	Re: secondary clutch G16 ..spring hole question Cartpartplus, vender on here, or smallblock450sl. Or Yamaha dealer in town.

07-09-2013, 10:05 AM	#8
Tawas Not Yet Wild Join Date: Jun 2013 Location: Michigan Posts: 44	Re: secondary clutch G16 ..spring hole question still wondering if I could get some GOOD advise on my clutch question ..about just getting a little more preload on my clutch stock spring... stock its B/3 will B/4 give me more than stock or do I change it to C/4 ..is the clutch need to stay in B hole for just a bit more than stock..

07-09-2013, 01:47 PM	#9
DOOmsman Gone Wild Join Date: Jul 2008 Location: Reddick IL Posts: 11,220	Re: secondary clutch G16 ..spring hole question If you think about it and check the stock position you will see that hole 4 will increase tension.

07-09-2013, 06:12 PM	#10
Tawas Not Yet Wild Join Date: Jun 2013 Location: Michigan Posts: 44	Re: secondary clutch G16 ..spring hole question thank you very much ..thats all I needed to help me ..well appreciated

Similar Threads
Thread	Forum
G2 Driven Clutch Factory Spring hole setup	Gas Yamaha
Secondary clutch spring	Gas Yamaha
Secondary clutch puller - bolt hole spacing	Gas Yamaha
secondary clutch spring	Gas Yamaha
91 g2 secondary clutch spring	Gas Yamaha