|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
02-08-2015, 04:06 PM
|
#21 |
|
Gone Wild
 Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Curtis 1510-5201 Repair Question
That would make sense one of the Mosfets in the Full Bridge Motor Field driver burnt. There are 2 involved in each direction, so You may need to look under the addtional heat-sink tab to inspect.
If they are using the same IRF3710 Mosfet as in the Armature Half bridge driver, You have less than $3 of parts needed. 47Ω 5% - 1/4 watt resistor IRF3710 Mosfet ($2.58 ) http://www.mouser.com/ProductDetail/...Fc1i7Aod2yIA0A If you got time, who knows, that maybe all of the damage. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-08-2015, 08:52 PM
|
#22 |
|
DS Drivers Club Founder
Join Date: Jul 2013
Location: Upstate NY
Posts: 3,428
|
Re: Curtis 1510-5201 Repair Question
That looks like the correct one. The only problem now is getting to it. I took all of the screws out and slid the "face plate" off and I still couldn't get the two boards to separate from the controller itself
HPIM2850[2].jpg HPIM2851[1].jpg HPIM2852[1].jpg |
|
|
|
|
02-08-2015, 09:08 PM
|
#23 |
|
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Curtis 1510-5201 Repair Question
It looks like if You remove that one screw on the top board attaching the Mosfet(??) heat-sink tab to the circuit board, You can then squeeze the plastic posts and pull the entire top board off the bottom board (they all look line connectors, no solder between boards). The front panel should come up with it.
|
|
|
|
|
02-16-2015, 03:57 PM
|
#24 |
|
DS Drivers Club Founder
Join Date: Jul 2013
Location: Upstate NY
Posts: 3,428
|
Re: Curtis 1510-5201 Repair Question
Contacted FSIP about possibly sending the replacement parts and they said they wouldn't. Have an email in with Curtis as well
|
|
|
|
|
04-06-2015, 03:35 PM
|
#25 |
|
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: Curtis 1510-5201 Repair Question
Any updates? Interested to see if it's repairable.
 |
|
|
|
|
04-06-2015, 06:09 PM
|
#26 |
|
DS Drivers Club Founder
Join Date: Jul 2013
Location: Upstate NY
Posts: 3,428
|
Re: Curtis 1510-5201 Repair Question
Nothing yet, decided to put it to the back burner for now
|
|
|
|
|
04-06-2015, 08:17 PM
|
#27 |
|
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: Curtis 1510-5201 Repair Question
You're doing better than me, my whole cart is on my back burner!
 |
|
|
|
|
04-06-2015, 08:19 PM
|
#28 | |
|
DS Drivers Club Founder
Join Date: Jul 2013
Location: Upstate NY
Posts: 3,428
|
Re: Curtis 1510-5201 Repair Question
Quote:
 I've got a lot of stuff on the plate right now, and the little things aren't as important as they usually are |
|
|
|
|
|
01-13-2019, 01:10 AM
|
#29 |
|
Not Yet Wild
Join Date: Jan 2019
Posts: 1
|
Re: Curtis 1510-5201 Repair Question
I need a schematic for my Curtis 1510-5201 controller. Does anyone know if its possible to find it
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Curtis 1206HB-5201 Programming | Extreme DC! | |||
| Controlers 1510-5201, 1510A-5251 | Electric Club Car | |||
| Curtis 1510 vs. 1510A | Electric Club Car | |||
| Curtis 1510-5201 CC IQ controller | Golf Carts and Parts | |||
| Curtis PMC 1510-5201 | Electric EZGO | |||
Linear Mode
