|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
01-15-2019, 10:46 AM | #1 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,534
|
2013 Precedent Got my work cut out for me
I got a pretty good deal on a 2013 Precedent. I bought it knowing it needed a controller, and it had some flood damage. After opening it up I realized it was a little worse than I had thought. I have a new wiring harness on the way from Tahoedawg. My plans are, Alltrax XCT 48400, new MCOR, pull and inspect motor, (it runs when tested), then see where I'm at money wise. Hopefully gonna a full rebuild with all new Doubletake body, top, seats, etc. I wonder if FSIP could rebuild this controller for me? [emoji23][emoji23][emoji23]
Sent from my SM-G930R4 using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-15-2019, 03:19 PM | #2 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: 2013 Precedent Got my work cut out for me
I am going to go out on a Limb and say that FSIP, Curtis or even Biphase will not get that controller working again......
|
01-15-2019, 03:52 PM | #3 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 2013 Precedent Got my work cut out for me
mgray70. You do realize you ordered an IQ harness right? That's an Excel controller. Not gonna matter if you're using an Alltrax, just wanted to point that out though in case you decided to go back with OEM.
|
01-15-2019, 04:09 PM | #4 |
Gone Wild
Join Date: Jan 2017
Location: Miami, FL
Posts: 1,061
|
Re: 2013 Precedent Got my work cut out for me
If the water was high enough the controller looks that way I’m willing to bet the motor is toast. And it will be a mutha to get off the shaft.
|
01-15-2019, 04:21 PM | #5 | |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,534
|
Re: 2013 Precedent Got my work cut out for me
Quote:
Sent from my SM-G930R4 using Tapatalk |
|
01-15-2019, 04:21 PM | #6 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,534
|
Re: 2013 Precedent Got my work cut out for me
|
01-15-2019, 04:22 PM | #7 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 2013 Precedent Got my work cut out for me
I took it off the site. Club Car pulled a fast one on me. They discontinued the Excel harness with the MCOR4 connectors on it. Instead, now you have to order the older Excel harness with MCOR2 connectors on it and use an MCOR4 adapter plug, and it's twice the money as the one you bought. You did the best thing you could do considering what you're trying to do.
|
01-15-2019, 06:57 PM | #8 |
Gone Wild
Join Date: Jul 2017
Location: West Columbia Texas
Posts: 1,036
|
Re: 2013 Precedent Got my work cut out for me
Have you tested the MCOR? I was lucky with the flooded cart I bought. It had a ton of dielectric grease in the connectors I'm guessing that saved it.
Everything else I had to replace Motor Controller Key switch Reverse buzzer Solenoid Run/tow switch Headlight switch FNR switch Front hubs All wiring and cables Use the axle drop trick to get the motor off. I had to pick mine up and drop it 8 times but if finally came off! Good luck! Sent from my SM-G935V using Tapatalk |
01-15-2019, 07:00 PM | #9 |
Gone Wild
Join Date: Apr 2017
Location: SE TN
Posts: 2,217
|
Re: 2013 Precedent Got my work cut out for me
I see a lot of 10 foot pole marks on that cart.
|
01-15-2019, 07:11 PM | #10 |
Gone Wild
Join Date: Jul 2017
Location: West Columbia Texas
Posts: 1,036
|
Re: 2013 Precedent Got my work cut out for me
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2013 Precedent | Electric Club Car | |||
2013 club car Precedent vs 2013 EZGO RXV | Electric Club Car | |||
2013 Precedent | Gas Club Car | |||
2013 RXV Wheels and tires - will these work? | Electric EZGO | |||
2013 Precedent Build | Electric Club Car |