|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
01-30-2019, 10:51 PM
|
#1 |
|
Not Yet Wild
Join Date: Nov 2018
Posts: 28
|
2003 Club Car Ds 36v Bushings
I’ve replaced what I thought were all bushings on this cart but the vertical tubing directly behind the 2 front tires have a lot of movement in it. Wondering if there’s a bushing in there also?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-31-2019, 01:04 AM
|
#2 |
|
MOD of all BS!
 Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: 2003 Club Car Ds 36v Bushings
Are you referencing the king pins/spindles? (The vertical tubes the tie-rod ends connect to)
|
|
|
|
|
01-31-2019, 03:19 AM
|
#3 |
|
Not Yet Wild
Join Date: Nov 2018
Posts: 28
|
Re: 2003 Club Car Ds 36v Bushings
Yes! I didn’t know what it was called.
|
|
|
|
|
01-31-2019, 11:19 AM
|
#4 |
|
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: 2003 Club Car Ds 36v Bushings
Call David Hicks at Revolution Golf Cars 706-431-3917. Will be the best call you ever made for you and your cart....
|
|
|
|
|
01-31-2019, 11:54 AM
|
#5 |
|
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: 2003 Club Car Ds 36v Bushings
There are bronze bushings in the spindle knuckle. The king pin and the bushings do wear, especially if they are not greased on a regular basis.
Usually a new king pin will remove most of the play there. If you need to replace the bushings they will need to be pressed in, and will probably need to be reamed to the proper size after install so the new king pin will fit. |
|
|
|
|
01-31-2019, 04:10 PM
|
#6 |
|
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 2003 Club Car Ds 36v Bushings
You'll need two 8067 bushings and two 7048 bushings. As mentioned above, they'll need to be pressed in and reamed with a 3/4" reamer once installed. A new kingpin is recommended as well.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Changing bushings and shocks on a 2003 ez go | Gas EZGO | |||
| 2003 Club Car DS front end bushings | Electric Club Car | |||
| 97 club car shackle bushings | Electric Club Car | |||
| Leaf spring bushings, do they make polyurethane bushings? | Gas Club Car | |||
| Club Car DS Bushings | Electric Club Car | |||
Linear Mode
