lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 02-23-2019, 07:24 PM   #1
bmarv
Not Yet Wild
 
bmarv's Avatar
Club Car
 
Join Date: Oct 2018
Location: Charleston, SC
Posts: 33
Default Alltrax xct throttle calibration

I just got my controller installed and I'm having issues with my throttle. Cart is in my sig. MCOR4 conversion has been done and throttle worked fine before the swap. Now when I watch the throttle on the monitor page, it's showing 100% at hardly any pedal. I can't find where on the alltrax software to do a throttle learn. It will drive but only if I just lightly press the throttle.
bmarv is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 02-23-2019, 07:26 PM   #2
bmarv
Not Yet Wild
 
bmarv's Avatar
Club Car
 
Join Date: Oct 2018
Location: Charleston, SC
Posts: 33
Default Re: Alltrax xct throttle calibration

Looking at it now my throttle is actually working backwards. When it is on the floor it is showing 0% and when barely pressed it shows 100%
bmarv is offline   Reply With Quote
Old 02-23-2019, 07:30 PM   #3
WalterM6
Gone Wild
 
WalterM6's Avatar
Club Car
 
Join Date: Apr 2017
Location: SE TN
Posts: 2,217
Default Re: Alltrax xct throttle calibration

What throttle do you have selected in the software. It should be MCOR 5k-0 ohms.
WalterM6 is offline   Reply With Quote
Old 02-23-2019, 07:32 PM   #4
beachguysc
Getting Wild
 
beachguysc's Avatar
Club Car
 
Join Date: May 2018
Location: MB SC
Posts: 112
Default Re: Alltrax xct throttle calibration

Quote:
Originally Posted by bmarv View Post
I just got my controller installed and I'm having issues with my throttle. Cart is in my sig. MCOR4 conversion has been done and throttle worked fine before the swap. Now when I watch the throttle on the monitor page, it's showing 100% at hardly any pedal. I can't find where on the alltrax software to do a throttle learn. It will drive but only if I just lightly press the throttle.
I had something similar with Alltrax and new mcor 4. . Sergio’s advice in this thread worked for me.
http://www.buggiesgonewild.com/elect...al-issues.html
beachguysc is offline   Reply With Quote
Old 02-23-2019, 07:45 PM   #5
bmarv
Not Yet Wild
 
bmarv's Avatar
Club Car
 
Join Date: Oct 2018
Location: Charleston, SC
Posts: 33
Default Re: Alltrax xct throttle calibration

Quote:
Originally Posted by beachguysc View Post
I had something similar with Alltrax and new mcor 4. . Sergio’s advice in this thread worked for me.
http://www.buggiesgonewild.com/elect...al-issues.html
I just went through your thread. Clearing the autocal worked for me. Everything is now kosher!

Time to see what speeds i can get
bmarv is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Calibration for Curtis Controller 2013 Precedent Electric Club Car
calibration/test module adaptor Electric Club Car
Clutch calibration Big Block Talk!
SOC Calibration Electric EZGO
Alltrax Throttle Electric Yamaha


All times are GMT -5. The time now is 01:17 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.